Whether you feel you can’t see as well at night, or you feel you’re lighting too low, or too high, in all these circumstances, there’s only one part of your car at fault – your headlights, also identified as high beams. Although this adjustment might seem easy thanks to the thumbwheel on your dashboard, a complete adjustment is much more complex than this basic manipulation, and in this article, we are going to find out how to adjust the headlights of your Ford B-max? To get this done, first we will find out why you need to adjust your high beams, and secondly how to adjust the headlights of your Ford B-max.
Why adjust the headlights of your Ford B-max?
So let’s start our content with the benefit of adjusting the headlights of your Ford B-max. For many people, our headlights are adjusted sufficiently, and they seem to light up enough after dark. Unfortunately this is not constantly the circumstance and examining this setting, either because the headlights on your Ford B-max are not bright enough, or because you have the impression that they are too weak is a wise decision .
Adjusting the high beams of your Ford B-max for safety
To begin with, the headlight adjustment of a Ford B-max must be done for a basic safety reason. Regardless it’s for you, or for the other users you come across during your night trips. In truth, if you don’t see enough, the risk is to ignore an obstacle driving, or to predict a curve badly. However, if your headlights are too strong, even if you are supposed to switch to low beam lights when you pass a vehicle, the time needed to make this change will generally expose the driver in front of you to the headlight beam of your Ford B-max . It is therefore necessary for others as well as for you to have an optimal adjustment of your headlights.
Adjusting the headlights of a Ford B-max for legal reasons
In addition to safety, there is a law that supervises the power, the adjustment of car headlights (articles R313-2 of the Highway Code), here is what it suggests: have between 2 and 4 headlights that illuminate at least 100 meters. Another legislation supervises their use, the European one (directive 76/756/EEC), which stipulates that there is no maximum height for the adjustment of the headlights, but that the maximum width of the beam must be equivalent to that of the dipped headlights and that the maximum luminosity must be 225, 000 cd.
How to adjust the headlights of a Ford B-max?
We will now move on to the part that concerns you the most in this article, how to adjust the headlights of his Ford B-max? This adjustment might seem a bit complicated, but by following the guidance you should be able to do it without too much trouble.
Preparations to adjust the headlights of a Ford B-max
To begin with, you’ll need to prepare your car to adjust your high beams in good conditions, here are the preparations to put in place:
- Place your car on a surface in front of a white wall for example, about 4 or 5 meters from the wall.
- Verify your tire pressure attentively.
- Verify that the height adjustment knob for the lights is set to 0
- Try doing that with half a full tank.
- Take out all unnecessary weight from the car, only one person should be in the driver’s seat.
.
The headlight adjustment of his Ford B-max
Once your vehicle is in place, you will turn on your dipped beam and make a cross-shaped mark (one horizontal and one vertical section) in the middle of the beam that will be projected on the wall. Verify with a level that both parts of the cross are straight. Then back your car up to a distance of between 7 and 10 metres. For the rest of the procedure here are the steps to follow:
- Open your bonnet, find the screws for horizontal and vertical modification of the headlights of your Ford B-max (they are in general marked, and those on top must modify the verticality and the one on the side controls the horizontality of the adjustment).
- Use a cloth or different things to hide the projector on which you are not making the correction.
- Using the screws to make the horizontal correction, you should have the most intense part of the beam which should be a little to the right of the vertical line marked on the wall
- With regard to vertical correction, you will have to use the screw to try to position the upper end of the beam at the level of the horizontal marking on the wall, or slightly down below.
- Once finished, check that the headlights setting of your Ford B-max is logical, do not hesitate to check it after you have driven it, sometimes it may move.
.
.
If you want to adjust the fog lights on your Ford B-max, please go through our content on this subject matter.
In the event that you have any further questions about the Ford B-max, do not hesitate to consult our Ford B-max category.
