Whether you experience you can’t see as well at night, or you experience you’re lighting too low, or too high, in all these circumstances, there’s only one component of your vehicle guilty – your headlights, as well often known as high beams. Nevertheless this adjustment may appear easy thanks to the thumbwheel on your dashboard, a whole adjustment is much more technical than this basic manipulation, and in this article, we are going to discover how to adjust the headlights of your Fiat Tipo? To get this done, first we will discover why you need to adjust your high beams, and secondly how to adjust the headlights of your Fiat Tipo.
Why adjust the headlights of your Fiat Tipo?
So let’s start our article with the benefit of adjusting the headlights of your Fiat Tipo. For many of us, our headlights are adjusted good enough, and they seem to light up enough through the night. Sadly this is not constantly the case and looking at this setting, either because the headlights on your Fiat Tipo are not bright enough, or because you have the impression that they are too weak is a good idea .
Adjusting the high beams of your Fiat Tipo for safety
To begin with, the headlight adjustment of a Fiat Tipo must be conducted for a basic safety motive. If it’s for you, or for the other users you come across during your night trips. In truth, if you don’t see enough, the risk is to ignore an obstacle on your way, or to anticipate a curve badly. Alternatively, if your headlights are too strong, regardless if you are supposed to switch to low beam lights when you pass a car, the time required to make this switch will most of the time expose the driver in front of you to the headlight beam of your Fiat Tipo . It is therefore essential for others as well as for you to have an optimal adjustment of your headlights.
Adjusting the headlights of a Fiat Tipo for legal reasons
In addition to safety, there is a law that supervises the power, the adjustment of car headlights (articles R313-2 of the Highway Code), here is what it specifies: have between 2 and 4 headlights that illuminate at minimum 100 meters. Another legislation supervises their use, the European one (directive 76/756/EEC), which stipulates that there is no maximum height for the adjustment of the headlights, but that the maximum width of the beam must be very same to that of the dipped headlights and that the maximum luminosity must be 225, 000 cd.
How to adjust the headlights of a Fiat Tipo?
We will now proceed to the section that interests you the most in this article, how to adjust the headlights of his Fiat Tipo? This setting may appear a bit complex, but by simply following the instructions you should have the ability to perform it without too much trouble.
Preparations to adjust the headlights of a Fiat Tipo
To begin with, you’ll need to prepare your vehicle to adjust your high beams in good conditions, here are the preparations to executed:
- Place your vehicle on a surface in front of a white wall for example, about 4 or 5 meters from the wall.
- Verify your tire pressure attentively.
- Verify that the height adjustment knob for the lights is set to 0
- Try doing that with half a full tank.
- Remove all needless weight from the automobile, only one person should be in the driver’s seat.
.
The headlight adjustment of his Fiat Tipo
Once your vehicle is in position, you will turn on your dipped beam and make a cross-shaped mark (one horizontal and one vertical section) in the middle of the beam that will be projected on the wall. Verify with a level that both parts of the cross are straight. Then back your vehicle up to a distance of between 7 and 10 metres. For the rest of the process here are the steps to follow:
- Open your bonnet, identify the screws for horizontal and vertical adjustment of the headlights of your Fiat Tipo (they are in general marked, and those on top must adjust the verticality and the one on the side handles the horizontality of the adjustment).
- Use a cloth or something else to hide the projector on which you are not making the correction.
- Using the screws to make the horizontal correction, you should have the most intense component of the beam which should be a little to the right of the vertical line marked on the wall
- With regard to vertical correction, you will have to use the screw to try to position the upper end of the beam at the level of the horizontal marking on the wall, or slightly below.
- Once finished, verify that the headlights setting of your Fiat Tipo is logical, do not think twice to verify it after you have driven it, often it may move.
.
.
If you want to adjust the fog lights on your Fiat Tipo, please go through our article on this subject matter.
To get more tips on the Fiat Tipo, take a look at the Fiat Tipo category.
