If you feel you can’t see as well at night, or you feel you’re lighting too low, or too high, in all these cases, there’s only one component of your vehicle guilty – your headlights, as well known as high beams. Although this adjustment may seem easy thanks to the thumbwheel on your dashboard, a complete adjustment is much more complex than this basic manipulation, and in this post, we are going to discover how to adjust the headlights of your Fiat Punto? To do this, first we will discover why you need to adjust your high beams, and secondly how to adjust the headlights of your Fiat Punto.
Why adjust the headlights of your Fiat Punto?
So let’s start our content with the benefit of adjusting the headlights of your Fiat Punto. For many of us, our headlights are adjusted good enough, and they seem to light up enough after dark. Regrettably this is not always the case and examining this setting, either because the headlights on your Fiat Punto are not bright enough, or because you have the sensation that they are too weak is a great idea .
Adjusting the high beams of your Fiat Punto for safety
First of all, the headlight adjustment of a Fiat Punto must be made for a basic security explanation. Regardless it’s for you, or for the other users you come across during your night trips. In actual fact, if you don’t see enough, the risk is to fail to see an obstacle while traveling, or to predict a curve badly. Alternatively, if your headlights are too strong, even if you are meant to switch to low beam lights when you pass a car, the time required to make this switch will generally expose the driver in front of you to the headlight beam of your Fiat Punto . It is therefore necessary for others as well as for you to have an ideal adjustment of your headlights.
Adjusting the headlights of a Fiat Punto for legal reasons
Furthermore to security, there is a law that regulates the power, the adjustment of motor vehicle headlights (articles R313-2 of the Highway Code), here is what it specifies: have between 2 and 4 headlights that illuminate at minimum 100 meters. Another legislation regulates their use, the European one (directive 76/756/EEC), which stipulates that there is no maximum height for the adjustment of the headlights, but that the maximum width of the beam must be identical to that of the dipped headlights and that the maximum luminosity must be 225, 000 cd.
How to adjust the headlights of a Fiat Punto?
We will now move on to the section that interests you the most in this post, how to adjust the headlights of his Fiat Punto? This setting may seem a bit complicated, but by simply following the recommendations you should be able to accomplish it without too much problem.
Preparations to adjust the headlights of a Fiat Punto
First of all, you’ll need to prepare your vehicle to adjust your high beams in good conditions, here are the preparations to set up:
- Place your vehicle on a surface in front of a white wall for example, about 4 or 5 meters from the wall.
- Check your tire pressure carefully.
- Check that the height adjustment knob for the lights is set to 0
- Try doing that with half a full tank.
- Remove all unneeded weight from the automobile, only one person should be in the driver’s seat.
.
The headlight adjustment of his Fiat Punto
Once your vehicle is in place, you will turn on your dipped beam and make a cross-shaped mark (one horizontal and one vertical section) in the middle of the beam that will be projected on the wall. Check with a level that both parts of the cross are horizontal. Then back your vehicle up to a distance of between 7 and 10 metres. For the rest of the procedure here are the steps to stick to:
- Open your bonnet, find the screws for horizontal and vertical adjustment of the headlights of your Fiat Punto (they are usually designated, and those on top must adjust the verticality and the one on the side adjusts the horizontality of the adjustment).
- Use a cloth or something else to hide the projector on which you are not making the modification.
- Using the screws to make the horizontal modification, you should have the most intense component of the beam which should be a little to the right of the vertical line marked on the wall
- With regard to vertical modification, you will have to use the screw to try to position the upper end of the beam at the level of the horizontal marking on the wall, or slightly below.
- Once finished, check that the headlights setting of your Fiat Punto is coherent, do not think twice to check it after you have driven it, in some cases it may move.
.
.
If you want to adjust the fog lights on your Fiat Punto, please browse our content on this subject.
In the event that you have any further questions about the Fiat Punto, do not hesitate to consult our Fiat Punto category.
