If you experience you can’t see as well at night, or you experience you’re lighting too low, or too high, in all these situations, there’s only one part of your car to take responsibility – your headlights, also known as high beams. Although this adjustment may appear easy thanks to the thumbwheel on your dashboard, a complete adjustment is much more complex than this elementary manipulation, and in this post, we are going to see how to adjust the headlights of your Fiat Panda 2? To get this done, first we will see why you need to adjust your high beams, and secondly how to adjust the headlights of your Fiat Panda 2.
Why adjust the headlights of your Fiat Panda 2?
So let’s start our content page with the benefit of adjusting the headlights of your Fiat Panda 2. For many of us, our headlights are adjusted sufficiently, and they appear to light up enough through the night. However this is not always the circumstance and checking this setting, either because the headlights on your Fiat Panda 2 are not bright enough, or because you have the sensation that they are too weak is a wise decision .
Adjusting the high beams of your Fiat Panda 2 for safety
First of all, the headlight adjustment of a Fiat Panda 2 must be finished for a simple security reason. Whether it’s for you, or for the other users you come across during your night trips. In fact, if you don’t see enough, the risk is to fail to see an obstacle on your way, or to predict a curve badly. On the other hand, if your headlights are too strong, even if you are expected to switch to low beam lights when you cross a car, the time required to make this change will generally expose the driver in front of you to the headlight beam of your Fiat Panda 2 . It is consequently necessary for others as well as for you to have an optimal adjustment of your headlights.
Adjusting the headlights of a Fiat Panda 2 for legal reasons
In addition to security, there is a law that regulates the power, the adjustment of motor vehicle headlights (articles R313-2 of the Highway Code), here is what it specifies: have between 2 and 4 headlights that illuminate at minimum 100 meters. Another legislation regulates their use, the European one (directive 76/756/EEC), which stipulates that there is no maximum height for the adjustment of the headlights, but that the maximum width of the beam must be equivalent to that of the dipped headlights and that the maximum luminosity must be 225, 000 cd.
How to adjust the headlights of a Fiat Panda 2?
We will now move on to the section that concerns you the most in this post, how to adjust the headlights of his Fiat Panda 2? This setting may appear a bit difficult, but by following the guidelines you should be able to do it without too much problem.
Preparations to adjust the headlights of a Fiat Panda 2
First of all, you’ll need to prepare your car to adjust your high beams in good conditions, here are the preparations to set up:
- Place your car on a surface in front of a white wall for example, about 4 or 5 meters from the wall.
- Verify your tire pressure cautiously.
- Verify that the height adjustment knob for the lights is set to 0
- Try doing that with half a full tank.
- Take out all unnecessary weight from the vehicle, only one person should be in the driver’s seat.
.
The headlight adjustment of his Fiat Panda 2
Once your vehicle is in place, you will turn on your dipped beam and make a cross-shaped mark (one horizontal and one vertical section) in the middle of the beam that will be projected on the wall. Verify with a level that both parts of the cross are straight. Then back your car up to a distance of between 7 and 10 metres. For the rest of the procedure here are the steps to follow:
- Open your bonnet, find the screws for horizontal and vertical control of the headlights of your Fiat Panda 2 (they are generally designated, and those on top must adjust the verticality and the one on the side controls the horizontality of the adjustment).
- Use a cloth or different things to hide the projector on which you are not making the adjustment.
- Using the screws to make the horizontal adjustment, you should have the most intense part of the beam which should be a little to the right of the vertical line marked on the wall
- With regard to vertical adjustment, you will have to use the screw to try to position the upper end of the beam at the level of the horizontal marking on the wall, or slightly down below.
- Once finished, verify that the headlights setting of your Fiat Panda 2 is logical, do not think twice to verify it after you have driven it, sometimes it may move.
.
.
If you want to adjust the fog lights on your Fiat Panda 2, please go through our content page on this subject matter.
If you wish more tutorials on the Fiat Panda 2, go to our Fiat Panda 2 category.
