Whether you feel you can’t see as well at night, or you feel you’re lighting too low, or too high, in all these scenarios, there’s only one component of your vehicle at fault – your headlights, also often known as high beams. Nevertheless this adjustment might seem easy thanks to the thumbwheel on your dashboard, a complete adjustment is much more technical than this simple manipulation, and in this post, we are going to discover how to adjust the headlights of your Fiat Idea? To get this done, first we will discover why you need to adjust your high beams, and secondly how to adjust the headlights of your Fiat Idea.
Why adjust the headlights of your Fiat Idea?
So let’s begin our content page with the benefit of adjusting the headlights of your Fiat Idea. For the majority of us, our headlights are adjusted good enough, and they seem to light up enough during the night. However this is not always the case and looking at this setting, either because the headlights on your Fiat Idea are not bright enough, or because you have the impression that they are too weak is a great idea .
Adjusting the high beams of your Fiat Idea for safety
To begin with, the headlight adjustment of a Fiat Idea must be conducted for a basic safety explanation. If it’s for you, or for the other users you come across during your night trips. In truth, if you don’t see enough, the risk is to ignore an obstacle on the road, or to anticipate a curve badly. Alternatively, if your headlights are too powerful, even if you are meant to switch to low beam lights when you pass a vehicle, the time required to make this change will most of the time expose the driver in front of you to the headlight beam of your Fiat Idea . It is therefore important for others as well as for you to have an optimal adjustment of your headlights.
Adjusting the headlights of a Fiat Idea for legal reasons
In addition to safety, there is a law that supervises the power, the adjustment of motor vehicle headlights (articles R313-2 of the Highway Code), here is what it suggests: have between 2 and 4 headlights that illuminate at minimum 100 meters. Another legislation supervises their use, the European one (directive 76/756/EEC), which stipulates that there is no maximum height for the adjustment of the headlights, but that the maximum width of the beam must be matching to that of the dipped headlights and that the maximum luminosity must be 225, 000 cd.
How to adjust the headlights of a Fiat Idea?
We will now proceed to the section that interests you the most in this post, how to adjust the headlights of his Fiat Idea? This setting might seem a bit difficult, but by following the guidelines you should have the ability to perform it without too much concern.
Preparations to adjust the headlights of a Fiat Idea
To begin with, you’ll need to prepare your vehicle to adjust your high beams in good conditions, here are the preparations to put in place:
- Place your vehicle on a surface in front of a white wall for example, about 4 or 5 meters from the wall.
- Verify your tire pressure attentively.
- Verify that the height adjustment knob for the lights is set to 0
- Try doing that with half a full tank.
- Take out all unneeded weight from the automobile, just one person should be in the driver’s seat.
.
The headlight adjustment of his Fiat Idea
Once your car is in position, you will turn on your dipped beam and make a cross-shaped mark (one horizontal and one vertical section) in the middle of the beam that will be projected on the wall. Verify with a level that both parts of the cross are horizontal. Then back your vehicle up to a distance of between 7 and 10 metres. For the rest of the process here are the steps to follow:
- Open your bonnet, identify the screws for horizontal and vertical modification of the headlights of your Fiat Idea (they are usually marked, and those on top must adjust the verticality and the one on the side adjusts the horizontality of the adjustment).
- Use a cloth or different things to hide the projector on which you are not making the adjustment.
- Using the screws to make the horizontal adjustment, you should have the most intense component of the beam which should be a little to the right of the vertical line noted on the wall
- With regard to vertical adjustment, you will have to use the screw to try to position the upper end of the beam at the level of the horizontal marking on the wall, or slightly below.
- Once finished, check that the headlights setting of your Fiat Idea is logical, do not hesitate to check it after you have driven it, often it may move.
.
.
If you want to adjust the fog lights on your Fiat Idea, please browse our content page on this subject matter.
If you want more tutorials on the Fiat Idea, go to our Fiat Idea category.
