If you feel you can’t see as well at night, or you feel you’re lighting too low, or too high, in all these cases, there’s only one component of your vehicle responsible – your headlights, as well called high beams. Nevertheless this adjustment might seem easy thanks to the thumbwheel on your dashboard, a whole adjustment is much more technical than this simple manipulation, and in this post, we are going to discover how to adjust the headlights of your Fiat Ducato? To do this, first we will discover why you need to adjust your high beams, and secondly how to adjust the headlights of your Fiat Ducato.

adjust-headlights-fiat-ducato

Why adjust the headlights of your Fiat Ducato?

So let’s start our article with the interest of adjusting the headlights of your Fiat Ducato. For many of us, our headlights are adjusted good enough, and they appear to light up enough at night. Regrettably this is not constantly the circumstance and looking at this setting, either because the headlights on your Fiat Ducato are not bright enough, or because you have the sensation that they are too weak is a wise decision .

Adjusting the high beams of your Fiat Ducato for safety

To begin with, the headlight adjustment of a Fiat Ducato must be finished for a very easy security explanation. Whether it’s for you, or for the other users you come across during your night trips. In truth, if you don’t see enough, the risk is to miss an obstacle on the road, or to predict a curve badly. On the other hand, if your headlights are too strong, even if you are meant to switch to low beam lights when you pass a vehicle, the time required to make this change will most of the time expose the driver in front of you to the headlight beam of your Fiat Ducato . It is therefore essential for others as well as for you to have an optimal adjustment of your headlights.

Adjusting the headlights of a Fiat Ducato for legal reasons

In addition to security, there is a law that regulates the power, the adjustment of car headlights (articles R313-2 of the Highway Code), here is what it specifies: have between 2 and 4 headlights that illuminate at minimum 100 meters. Another legislation regulates their use, the European one (directive 76/756/EEC), which stipulates that there is no maximum height for the adjustment of the headlights, but that the maximum width of the beam must be matching to that of the dipped headlights and that the maximum luminosity must be 225, 000 cd.

How to adjust the headlights of a Fiat Ducato?

We will now proceed to the part that interests you the most in this post, how to adjust the headlights of his Fiat Ducato? This adjustment might seem a bit difficult, but by simply following the instructions you should be able to perform it without too much concern.

Preparations to adjust the headlights of a Fiat Ducato

To begin with, you’ll need to prepare your vehicle to adjust your high beams in good conditions, here are the preparations to executed:

  • Place your vehicle on a surface in front of a white wall for example, about 4 or 5 meters from the wall.
  • Check your tire pressure attentively.
  • Check that the height adjustment knob for the lights is set to 0
  • .

  • Try doing that with half a full tank.
  • Remove all needless weight from the vehicle, only one person should be in the driver’s seat.

The headlight adjustment of his Fiat Ducato

Once your car is in position, you will turn on your dipped beam and make a cross-shaped mark (one horizontal and one vertical section) in the middle of the beam that will be projected on the wall. Check with a level that both parts of the cross are horizontal. Then back your vehicle up to a distance of between 7 and 10 metres. For the rest of the procedure here are the steps to follow:

  • Open your bonnet, locate the screws for horizontal and vertical modification of the headlights of your Fiat Ducato (they are in most cases designated, and those on top must adjust the verticality and the one on the side adjusts the horizontality of the adjustment).
  • Use a cloth or another thing to hide the projector on which you are not making the adjustment.
  • Using the screws to make the horizontal adjustment, you should have the most intense component of the beam which should be a little to the right of the vertical line noted on the wall
  • .

  • With regard to vertical adjustment, you will have to use the screw to try to position the upper end of the beam at the level of the horizontal marking on the wall, or slightly below.
  • Once finished, check that the headlights setting of your Fiat Ducato is logical, do not think twice to check it after you have driven it, often it may move.

.
If you want to adjust the fog lights on your Fiat Ducato, please go through our article on this subject matter.

In the event that you have any additional questions about the Fiat Ducato, do not hesitate to consult our Fiat Ducato category.