If you experience you can’t see as well at night, or you experience you’re lighting too low, or too high, in all these situations, there’s only one part of your vehicle to take responsibility – your headlights, as well often known as high beams. Although this adjustment may appear easy thanks to the thumbwheel on your dashboard, a whole adjustment is much more complex than this basic manipulation, and in this post, we are going to discover how to adjust the headlights of your Fiat Doblo? To do this, first we will discover why you need to adjust your high beams, and secondly how to adjust the headlights of your Fiat Doblo.
Why adjust the headlights of your Fiat Doblo?
So let’s begin our content with the interest of adjusting the headlights of your Fiat Doblo. For many people, our headlights are adjusted sufficiently, and they appear to light up enough at nighttime. However this is not always the case and examining this setting, either because the headlights on your Fiat Doblo are not bright enough, or because you have the impression that they are too weak is a great idea .
Adjusting the high beams of your Fiat Doblo for safety
To begin with, the headlight adjustment of a Fiat Doblo must be achieved for a very easy safety explanation. Whether it’s for you, or for the other users you come across during your night trips. Indeed, if you don’t see enough, the risk is to fail to see an obstacle driving, or to anticipate a curve badly. However, if your headlights are too powerful, even if you are expected to switch to low beam lights when you cross a car, the time needed to make this switch will most of the time expose the driver in front of you to the headlight beam of your Fiat Doblo . It is consequently important for others as well as for you to have an optimal adjustment of your headlights.
Adjusting the headlights of a Fiat Doblo for legal reasons
In addition to safety, there is a law that regulates the power, the adjustment of car headlights (articles R313-2 of the Highway Code), here is what it specifies: have between 2 and 4 headlights that illuminate at minimum 100 meters. Another legislation regulates their use, the European one (directive 76/756/EEC), which stipulates that there is no maximum height for the adjustment of the headlights, but that the maximum width of the beam must be identical to that of the dipped headlights and that the maximum luminosity must be 225, 000 cd.
How to adjust the headlights of a Fiat Doblo?
We will now proceed to the part that interests you the most in this post, how to adjust the headlights of his Fiat Doblo? This setting may appear a bit difficult, but by simply following the instructions you should have the ability to do it without too much concern.
Preparations to adjust the headlights of a Fiat Doblo
To begin with, you’ll need to prepare your vehicle to adjust your high beams in good conditions, here are the preparations to executed:
- Place your vehicle on a surface in front of a white wall for example, about 4 or 5 meters from the wall.
- Verify your tire pressure carefully.
- Verify that the height adjustment knob for the lights is set to 0
- Try doing that with half a full tank.
- Take out all needless weight from the automobile, only one person should be in the driver’s seat.
.
The headlight adjustment of his Fiat Doblo
Once your vehicle is in place, you will turn on your dipped beam and make a cross-shaped mark (one horizontal and one vertical section) in the middle of the beam that will be projected on the wall. Verify with a level that both parts of the cross are horizontal. Then back your vehicle up to a distance of between 7 and 10 metres. For the rest of the process here are the steps to follow:
- Open your bonnet, find the screws for horizontal and vertical control of the headlights of your Fiat Doblo (they are usually marked, and those on top must adjust the verticality and the one on the side handles the horizontality of the adjustment).
- Use a cloth or another thing to hide the projector on which you are not making the modification.
- Using the screws to make the horizontal modification, you should have the most intense part of the beam which should be a little to the right of the vertical line noted on the wall
- With regard to vertical modification, you will have to use the screw to try to position the upper end of the beam at the level of the horizontal marking on the wall, or slightly below.
- Once finished, verify that the headlights setting of your Fiat Doblo is logical, do not think twice to verify it after you have driven it, in some cases it may move.
.
.
If you want to adjust the fog lights on your Fiat Doblo, please go through our content on this subject matter.
If perhaps you have any additional questions about the Fiat Doblo, do not hesitate to consult our Fiat Doblo category.
