Whether you experience you can’t see as well at night, or you experience you’re lighting too low, or too high, in all these scenarios, there’s only one part of your car guilty – your headlights, as well called high beams. Nevertheless this adjustment may appear easy thanks to the thumbwheel on your dashboard, a complete adjustment is much more complex than this simple manipulation, and in this article, we are going to see how to adjust the headlights of your Fiat Doblo Cargo? To achieve this, first we will see why you need to adjust your high beams, and secondly how to adjust the headlights of your Fiat Doblo Cargo.

adjust-headlights-fiat-doblo-cargo

Why adjust the headlights of your Fiat Doblo Cargo?

So let’s start our content page with the interest of adjusting the headlights of your Fiat Doblo Cargo. For many people, our headlights are adjusted sufficiently, and they appear to light up enough at nighttime. Unfortunately this is not constantly the case and looking at this setting, either because the headlights on your Fiat Doblo Cargo are not bright enough, or because you have the impression that they are too weak is a great idea .

Adjusting the high beams of your Fiat Doblo Cargo for safety

First of all, the headlight adjustment of a Fiat Doblo Cargo must be made for a simple security motive. Whether it’s for you, or for the other users you come across during your night trips. In truth, if you don’t see enough, the risk is to miss out an obstacle while traveling, or to predict a curve badly. However, if your headlights are too strong, regardless if you are expected to switch to low beam lights when you pass a vehicle, the time needed to make this switch will most of the time expose the driver in front of you to the headlight beam of your Fiat Doblo Cargo . It is therefore important for others as well as for you to have an optimal adjustment of your headlights.

Adjusting the headlights of a Fiat Doblo Cargo for legal reasons

Furthermore to security, there is a law that regulates the power, the adjustment of motor vehicle headlights (articles R313-2 of the Highway Code), here is what it suggests: have between 2 and 4 headlights that illuminate at minimum 100 meters. Another legislation regulates their use, the European one (directive 76/756/EEC), which stipulates that there is no maximum height for the adjustment of the headlights, but that the maximum width of the beam must be equivalent to that of the dipped headlights and that the maximum luminosity must be 225, 000 cd.

How to adjust the headlights of a Fiat Doblo Cargo?

We will now move on to the part that interests you the most in this article, how to adjust the headlights of his Fiat Doblo Cargo? This setting may appear a bit complex, but by following the guidelines you should have the ability to accomplish it without too much issue.

Preparations to adjust the headlights of a Fiat Doblo Cargo

First of all, you’ll need to prepare your car to adjust your high beams in good conditions, here are the preparations to put in place:

  • Place your car on a surface in front of a white wall for example, about 4 or 5 meters from the wall.
  • Verify your tire pressure carefully.
  • Verify that the height adjustment knob for the lights is set to 0
  • .

  • Try doing that with half a full tank.
  • Remove all unnecessary weight from the vehicle, just one person should be in the driver’s seat.

The headlight adjustment of his Fiat Doblo Cargo

Once your vehicle is in position, you will turn on your dipped beam and make a cross-shaped mark (one horizontal and one vertical section) in the middle of the beam that will be projected on the wall. Verify with a level that both parts of the cross are horizontal. Then back your car up to a distance of between 7 and 10 metres. For the rest of the procedure here are the steps to follow:

  • Open your hood, locate the screws for horizontal and vertical modification of the headlights of your Fiat Doblo Cargo (they are usually marked, and those on top must modify the verticality and the one on the side handles the horizontality of the adjustment).
  • Use a cloth or different things to hide the projector on which you are not making the correction.
  • Using the screws to make the horizontal correction, you should have the most intense part of the beam which should be a little to the right of the vertical line marked on the wall
  • .

  • With regard to vertical correction, you will have to use the screw to try to position the upper end of the beam at the level of the horizontal marking on the wall, or slightly below.
  • Once finished, check that the headlights setting of your Fiat Doblo Cargo is logical, do not think twice to check it after you have driven it, sometimes it may move.

.
If you want to adjust the fog lights on your Fiat Doblo Cargo, please go through our content page on this subject matter.

Whenever you have any further questions about the Fiat Doblo Cargo, do not hesitate to consult our Fiat Doblo Cargo category.