If you feel you can’t see as well at night, or you feel you’re lighting too low, or too high, in all these situations, there’s only one part of your car at fault – your headlights, also called high beams. Although this adjustment may seem easy thanks to the thumbwheel on your dashboard, a complete adjustment is much more technical than this elementary manipulation, and in this post, we are going to see how to adjust the headlights of your Fiat Bravo? To do this, first we will see why you need to adjust your high beams, and secondly how to adjust the headlights of your Fiat Bravo.
Why adjust the headlights of your Fiat Bravo?
So let’s begin our content page with the interest of adjusting the headlights of your Fiat Bravo. For most people, our headlights are adjusted sufficiently, and they appear to light up enough through the night. Regrettably this is not always the case and looking at this setting, either because the headlights on your Fiat Bravo are not bright enough, or because you have the impression that they are too weak is a great idea .
Adjusting the high beams of your Fiat Bravo for safety
To begin with, the headlight adjustment of a Fiat Bravo must be finished for a basic safety explanation. Regardless it’s for you, or for the other users you come across during your night trips. In actual fact, if you don’t see enough, the risk is to miss out an obstacle while traveling, or to anticipate a curve badly. However, if your headlights are too strong, regardless if you are meant to switch to low beam lights when you cross a car, the time required to make this switch will most of the time expose the driver in front of you to the headlight beam of your Fiat Bravo . It is consequently important for others as well as for you to have an ideal adjustment of your headlights.
Adjusting the headlights of a Fiat Bravo for legal reasons
In addition to safety, there is a law that supervises the power, the adjustment of motor vehicle headlights (articles R313-2 of the Highway Code), here is what it suggests: have between 2 and 4 headlights that illuminate at least 100 meters. Another legislation supervises their use, the European one (directive 76/756/EEC), which stipulates that there is no maximum height for the adjustment of the headlights, but that the maximum width of the beam must be equivalent to that of the dipped headlights and that the maximum luminosity must be 225, 000 cd.
How to adjust the headlights of a Fiat Bravo?
We will now proceed to the part that interests you the most in this post, how to adjust the headlights of his Fiat Bravo? This adjustment may seem a bit complex, but by following the recommendations you should be able to accomplish it without too much concern.
Preparations to adjust the headlights of a Fiat Bravo
To begin with, you’ll need to prepare your car to adjust your high beams in good conditions, here are the preparations to executed:
- Place your car on a surface in front of a white wall for example, about 4 or 5 meters from the wall.
- Check your tire pressure attentively.
- Check that the height adjustment knob for the lights is set to 0
- Try doing that with half a full tank.
- Remove all needless weight from the vehicle, only one person should be in the driver’s seat.
.
The headlight adjustment of his Fiat Bravo
Once your vehicle is in position, you will turn on your dipped beam and make a cross-shaped mark (one horizontal and one vertical section) in the middle of the beam that will be projected on the wall. Check with a level that both parts of the cross are horizontal. Then back your car up to a distance of between 7 and 10 metres. For the rest of the process here are the steps to follow:
- Open your bonnet, find the screws for horizontal and vertical modification of the headlights of your Fiat Bravo (they are generally designated, and those on top must adjust the verticality and the one on the side handles the horizontality of the adjustment).
- Use a cloth or different things to hide the projector on which you are not making the correction.
- Using the screws to make the horizontal correction, you should have the most intense part of the beam which should be a little to the right of the vertical line marked on the wall
- With regard to vertical correction, you will have to use the screw to try to position the upper end of the beam at the level of the horizontal marking on the wall, or slightly below.
- Once finished, verify that the headlights setting of your Fiat Bravo is logical, do not think twice to verify it after you have driven it, often it may move.
.
.
If you want to adjust the fog lights on your Fiat Bravo, please browse our content page on this subject matter.
Whenever you have any further questions about the Fiat Bravo, do not hesitate to consult our Fiat Bravo category.
