Whether you experience you can’t see as well at night, or you experience you’re lighting too low, or too high, in all these circumstances, there’s only one part of your car at fault – your headlights, also identified as high beams. Nevertheless this adjustment may appear easy thanks to the thumbwheel on your dashboard, a whole adjustment is much more technical than this simple manipulation, and in this article, we are going to find out how to adjust the headlights of your Ds Ds 7 Crossback? To do this, first we will find out why you need to adjust your high beams, and secondly how to adjust the headlights of your Ds Ds 7 Crossback.
Why adjust the headlights of your Ds Ds 7 Crossback?
So let’s start our article with the interest of adjusting the headlights of your Ds Ds 7 Crossback. For most people, our headlights are adjusted good enough, and they seem to light up enough at nighttime. Unfortunately this is not constantly the case and looking at this setting, either because the headlights on your Ds Ds 7 Crossback are not bright enough, or because you have the feeling that they are too weak is a great idea .
Adjusting the high beams of your Ds Ds 7 Crossback for safety
To begin with, the headlight adjustment of a Ds Ds 7 Crossback must be made for a very easy safety explanation. Regardless it’s for you, or for the other users you come across during your night trips. Indeed, if you don’t see enough, the risk is to ignore an obstacle on your way, or to anticipate a curve badly. Alternatively, if your headlights are too strong, even if you are meant to switch to low beam lights when you cross a car, the time needed to make this change will generally expose the driver in front of you to the headlight beam of your Ds Ds 7 Crossback . It is therefore important for others as well as for you to have an optimal adjustment of your headlights.
Adjusting the headlights of a Ds Ds 7 Crossback for legal reasons
In addition to safety, there is a law that supervises the power, the adjustment of motor vehicle headlights (articles R313-2 of the Highway Code), here is what it specifies: have between 2 and 4 headlights that illuminate at least 100 meters. Another legislation supervises their use, the European one (directive 76/756/EEC), which stipulates that there is no maximum height for the adjustment of the headlights, but that the maximum width of the beam must be equivalent to that of the dipped headlights and that the maximum luminosity must be 225, 000 cd.
How to adjust the headlights of a Ds Ds 7 Crossback?
We will now go forward to the part that interests you the most in this article, how to adjust the headlights of his Ds Ds 7 Crossback? This setting may appear a bit complicated, but by following the guidance you should have the ability to do it without too much trouble.
Preparations to adjust the headlights of a Ds Ds 7 Crossback
To begin with, you’ll need to prepare your car to adjust your high beams in good conditions, here are the preparations to executed:
- Place your car on a surface in front of a white wall for example, about 4 or 5 meters from the wall.
- Verify your tire pressure carefully.
- Verify that the height adjustment knob for the lights is set to 0
- Try doing that with half a full tank.
- Remove all unnecessary weight from the car, only one person should be in the driver’s seat.
.
The headlight adjustment of his Ds Ds 7 Crossback
Once your car is in position, you will turn on your dipped beam and make a cross-shaped mark (one horizontal and one vertical section) in the middle of the beam that will be projected on the wall. Verify with a level that both parts of the cross are horizontal. Then back your car up to a distance of between 7 and 10 metres. For the rest of the process here are the steps to follow:
- Open your hood, locate the screws for horizontal and vertical modification of the headlights of your Ds Ds 7 Crossback (they are in most cases designated, and those on top must adjust the verticality and the one on the side adjusts the horizontality of the adjustment).
- Use a cloth or something else to hide the projector on which you are not making the modification.
- Using the screws to make the horizontal modification, you should have the most intense part of the beam which should be a little to the right of the vertical line noted on the wall
- With regard to vertical modification, you will have to use the screw to try to position the upper end of the beam at the level of the horizontal marking on the wall, or slightly down below.
- Once finished, check that the headlights setting of your Ds Ds 7 Crossback is logical, do not think twice to check it after you have driven it, occasionally it may move.
.
.
If you want to adjust the fog lights on your Ds Ds 7 Crossback, please browse our article on this subject matter.
To get more tips on the Ds Ds 7 Crossback, take a look at the Ds Ds 7 Crossback category.
