If you experience you can’t see as well at night, or you experience you’re lighting too low, or too high, in all these circumstances, there’s only one part of your vehicle to blame – your headlights, also often known as high beams. Although this adjustment may appear easy thanks to the thumbwheel on your dashboard, a complete adjustment is much more complex than this elementary manipulation, and in this post, we are going to discover how to adjust the headlights of your Ds Ds 5? To get this done, first we will discover why you need to adjust your high beams, and secondly how to adjust the headlights of your Ds Ds 5.
Why adjust the headlights of your Ds Ds 5?
So let’s start our content with the benefit of adjusting the headlights of your Ds Ds 5. For many of us, our headlights are adjusted good enough, and they seem to light up enough through the night. Sadly this is not always the circumstance and examining this setting, either because the headlights on your Ds Ds 5 are not bright enough, or because you have the sensation that they are too weak is a great idea .
Adjusting the high beams of your Ds Ds 5 for safety
To begin with, the headlight adjustment of a Ds Ds 5 must be carried out for a very easy security motive. Whether it’s for you, or for the other users you come across during your night trips. In fact, if you don’t see enough, the risk is to ignore an obstacle driving, or to anticipate a curve badly. On the other hand, if your headlights are too strong, regardless if you are expected to switch to low beam lights when you pass a vehicle, the time needed to make this change will generally expose the driver in front of you to the headlight beam of your Ds Ds 5 . It is therefore necessary for others as well as for you to have an optimal adjustment of your headlights.
Adjusting the headlights of a Ds Ds 5 for legal reasons
In addition to security, there is a law that regulates the power, the adjustment of motor vehicle headlights (articles R313-2 of the Highway Code), here is what it specifies: have between 2 and 4 headlights that illuminate at minimum 100 meters. Another legislation regulates their use, the European one (directive 76/756/EEC), which stipulates that there is no maximum height for the adjustment of the headlights, but that the maximum width of the beam must be identical to that of the dipped headlights and that the maximum luminosity must be 225, 000 cd.
How to adjust the headlights of a Ds Ds 5?
We will now proceed to the part that concerns you the most in this post, how to adjust the headlights of his Ds Ds 5? This adjustment may appear a bit complex, but by following the guidance you should be able to complete it without too much concern.
Preparations to adjust the headlights of a Ds Ds 5
To begin with, you’ll need to prepare your vehicle to adjust your high beams in good conditions, here are the preparations to executed:
- Place your vehicle on a surface in front of a white wall for example, about 4 or 5 meters from the wall.
- Verify your tire pressure attentively.
- Verify that the height adjustment knob for the lights is set to 0
- Try doing that with half a full tank.
- Take out all unneeded weight from the automobile, only one person should be in the driver’s seat.
.
The headlight adjustment of his Ds Ds 5
Once your car is in position, you will turn on your dipped beam and make a cross-shaped mark (one horizontal and one vertical section) in the middle of the beam that will be projected on the wall. Verify with a level that both parts of the cross are straight. Then back your vehicle up to a distance of between 7 and 10 metres. For the rest of the process here are the steps to stick to:
- Open your hood, identify the screws for horizontal and vertical control of the headlights of your Ds Ds 5 (they are generally designated, and those on top must adjust the verticality and the one on the side adjusts the horizontality of the adjustment).
- Use a cloth or different things to hide the projector on which you are not making the correction.
- Using the screws to make the horizontal correction, you should have the most intense part of the beam which should be a little to the right of the vertical line marked on the wall
- With regard to vertical correction, you will have to use the screw to try to position the upper end of the beam at the level of the horizontal marking on the wall, or slightly below.
- Once finished, check that the headlights setting of your Ds Ds 5 is logical, do not hesitate to check it after you have driven it, in some cases it may move.
.
.
If you want to adjust the fog lights on your Ds Ds 5, please browse our content on this subject.
To get more tips on the Ds Ds 5, take a look at the Ds Ds 5 category.
