Whether you feel you can’t see as well at night, or you feel you’re lighting too low, or too high, in all these scenarios, there’s only one part of your car to blame – your headlights, also called high beams. Although this adjustment might seem easy thanks to the thumbwheel on your dashboard, a complete adjustment is much more technical than this elementary manipulation, and in this post, we are going to see how to adjust the headlights of your Dodge Charger? To get this done, first we will see why you need to adjust your high beams, and secondly how to adjust the headlights of your Dodge Charger.
Why adjust the headlights of your Dodge Charger?
So let’s start our content with the benefit of adjusting the headlights of your Dodge Charger. For many of us, our headlights are adjusted good enough, and they seem to light up enough through the night. However this is not always the circumstance and examining this setting, either because the headlights on your Dodge Charger are not bright enough, or because you have the feeling that they are too weak is a wise decision .
Adjusting the high beams of your Dodge Charger for safety
First of all, the headlight adjustment of a Dodge Charger must be done for a basic security reason. Regardless it’s for you, or for the other users you come across during your night trips. In actual fact, if you don’t see enough, the risk is to fail to see an obstacle driving, or to anticipate a curve badly. On the other hand, if your headlights are too powerful, regardless if you are meant to switch to low beam lights when you cross a vehicle, the time required to make this switch will generally expose the driver in front of you to the headlight beam of your Dodge Charger . It is consequently necessary for others as well as for you to have an ideal adjustment of your headlights.
Adjusting the headlights of a Dodge Charger for legal reasons
Furthermore to security, there is a law that supervises the power, the adjustment of motor vehicle headlights (articles R313-2 of the Highway Code), here is what it specifies: have between 2 and 4 headlights that illuminate at least 100 meters. Another legislation supervises their use, the European one (directive 76/756/EEC), which stipulates that there is no maximum height for the adjustment of the headlights, but that the maximum width of the beam must be matching to that of the dipped headlights and that the maximum luminosity must be 225, 000 cd.
How to adjust the headlights of a Dodge Charger?
We will now proceed to the section that interests you the most in this post, how to adjust the headlights of his Dodge Charger? This adjustment might seem a bit complicated, but by following the instructions you should be able to accomplish it without too much problem.
Preparations to adjust the headlights of a Dodge Charger
First of all, you’ll need to prepare your car to adjust your high beams in good conditions, here are the preparations to executed:
- Place your car on a surface in front of a white wall for example, about 4 or 5 meters from the wall.
- Check your tire pressure cautiously.
- Check that the height adjustment knob for the lights is set to 0
- Try doing that with half a full tank.
- Remove all unneeded weight from the vehicle, just one person should be in the driver’s seat.
.
The headlight adjustment of his Dodge Charger
Once your car is in position, you will turn on your dipped beam and make a cross-shaped mark (one horizontal and one vertical section) in the middle of the beam that will be projected on the wall. Check with a level that both parts of the cross are horizontal. Then back your car up to a distance of between 7 and 10 metres. For the rest of the process here are the steps to stick to:
- Open your bonnet, locate the screws for horizontal and vertical adjustment of the headlights of your Dodge Charger (they are generally designated, and those on top must adjust the verticality and the one on the side handles the horizontality of the adjustment).
- Use a cloth or different things to hide the projector on which you are not making the adjustment.
- Using the screws to make the horizontal adjustment, you should have the most intense part of the beam which should be a little to the right of the vertical line noted on the wall
- With regard to vertical adjustment, you will have to use the screw to try to position the upper end of the beam at the level of the horizontal marking on the wall, or slightly below.
- Once finished, check that the headlights setting of your Dodge Charger is coherent, do not hesitate to check it after you have driven it, oftentimes it may move.
.
.
If you want to adjust the fog lights on your Dodge Charger, please go through our content on this subject matter.
Whenever you have any further questions about the Dodge Charger, do not hesitate to consult our Dodge Charger category.
