If you feel you can’t see as well at night, or you feel you’re lighting too low, or too high, in all these circumstances, there’s only one part of your car responsible – your headlights, also often known as high beams. Nevertheless this adjustment might seem easy thanks to the thumbwheel on your dashboard, a complete adjustment is much more complex than this elementary manipulation, and in this post, we are going to see how to adjust the headlights of your Dodge Caliber? To get this done, first we will see why you need to adjust your high beams, and secondly how to adjust the headlights of your Dodge Caliber.
Why adjust the headlights of your Dodge Caliber?
So let’s begin our article with the interest of adjusting the headlights of your Dodge Caliber. For most people, our headlights are adjusted good enough, and they seem to light up enough through the night. However this is not constantly the circumstance and examining this setting, either because the headlights on your Dodge Caliber are not bright enough, or because you have the impression that they are too weak is a great idea .
Adjusting the high beams of your Dodge Caliber for safety
To begin with, the headlight adjustment of a Dodge Caliber must be conducted for a simple safety reason. Whether it’s for you, or for the other users you come across during your night trips. Indeed, if you don’t see enough, the risk is to miss an obstacle on the road, or to anticipate a curve badly. However, if your headlights are too strong, even if you are meant to switch to low beam lights when you pass a vehicle, the time required to make this switch will generally expose the driver in front of you to the headlight beam of your Dodge Caliber . It is therefore important for others as well as for you to have an optimal adjustment of your headlights.
Adjusting the headlights of a Dodge Caliber for legal reasons
Furthermore to safety, there is a law that supervises the power, the adjustment of car headlights (articles R313-2 of the Highway Code), here is what it suggests: have between 2 and 4 headlights that illuminate at minimum 100 meters. Another legislation supervises their use, the European one (directive 76/756/EEC), which stipulates that there is no maximum height for the adjustment of the headlights, but that the maximum width of the beam must be equivalent to that of the dipped headlights and that the maximum luminosity must be 225, 000 cd.
How to adjust the headlights of a Dodge Caliber?
We will now move on to the part that concerns you the most in this post, how to adjust the headlights of his Dodge Caliber? This setting might seem a bit complicated, but by following the guidelines you should be able to complete it without too much issue.
Preparations to adjust the headlights of a Dodge Caliber
To begin with, you’ll need to prepare your car to adjust your high beams in good conditions, here are the preparations to executed:
- Place your car on a surface in front of a white wall for example, about 4 or 5 meters from the wall.
- Verify your tire pressure attentively.
- Verify that the height adjustment knob for the lights is set to 0
- Try doing that with half a full tank.
- Remove all unnecessary weight from the automobile, just one person should be in the driver’s seat.
.
The headlight adjustment of his Dodge Caliber
Once your vehicle is in place, you will turn on your dipped beam and make a cross-shaped mark (one horizontal and one vertical section) in the middle of the beam that will be projected on the wall. Verify with a level that both parts of the cross are straight. Then back your car up to a distance of between 7 and 10 metres. For the rest of the procedure here are the steps to stick to:
- Open your bonnet, locate the screws for horizontal and vertical modification of the headlights of your Dodge Caliber (they are generally marked, and those on top must adjust the verticality and the one on the side manages the horizontality of the adjustment).
- Use a cloth or something else to hide the projector on which you are not making the adjustment.
- Using the screws to make the horizontal adjustment, you should have the most intense part of the beam which should be a little to the right of the vertical line marked on the wall
- With regard to vertical adjustment, you will have to use the screw to try to position the upper end of the beam at the level of the horizontal marking on the wall, or slightly below.
- Once finished, check that the headlights setting of your Dodge Caliber is logical, do not think twice to check it after you have driven it, sometimes it may move.
.
.
If you want to adjust the fog lights on your Dodge Caliber, please go through our article on this subject matter.
In the event that you have any further questions about the Dodge Caliber, do not hesitate to consult our Dodge Caliber category.
