Whether you feel you can’t see as well at night, or you feel you’re lighting too low, or too high, in all these circumstances, there’s only one part of your vehicle guilty – your headlights, also called high beams. Nevertheless this adjustment might seem easy thanks to the thumbwheel on your dashboard, a whole adjustment is much more complex than this simple manipulation, and in this article, we are going to see how to adjust the headlights of your Dacia Sandero? To get this done, first we will see why you need to adjust your high beams, and secondly how to adjust the headlights of your Dacia Sandero.
Why adjust the headlights of your Dacia Sandero?
So let’s begin our content with the benefit of adjusting the headlights of your Dacia Sandero. For most people, our headlights are adjusted good enough, and they appear to light up enough at night. Regrettably this is not always the circumstance and looking at this setting, either because the headlights on your Dacia Sandero are not bright enough, or because you have the sensation that they are too weak is a wise decision .
Adjusting the high beams of your Dacia Sandero for safety
To begin with, the headlight adjustment of a Dacia Sandero must be achieved for a simple safety reason. Whether it’s for you, or for the other users you come across during your night trips. Obviously, if you don’t see enough, the risk is to miss out an obstacle driving, or to predict a curve badly. On the other hand, if your headlights are too strong, even if you are supposed to switch to low beam lights when you pass a vehicle, the time required to make this change will generally expose the driver in front of you to the headlight beam of your Dacia Sandero . It is therefore necessary for others as well as for you to have an optimal adjustment of your headlights.
Adjusting the headlights of a Dacia Sandero for legal reasons
Furthermore to safety, there is a law that regulates the power, the adjustment of motor vehicle headlights (articles R313-2 of the Highway Code), here is what it suggests: have between 2 and 4 headlights that illuminate at least 100 meters. Another legislation regulates their use, the European one (directive 76/756/EEC), which stipulates that there is no maximum height for the adjustment of the headlights, but that the maximum width of the beam must be matching to that of the dipped headlights and that the maximum luminosity must be 225, 000 cd.
How to adjust the headlights of a Dacia Sandero?
We will now go forward to the section that concerns you the most in this article, how to adjust the headlights of his Dacia Sandero? This adjustment might seem a bit difficult, but by following the guidance you should have the ability to complete it without too much concern.
Preparations to adjust the headlights of a Dacia Sandero
To begin with, you’ll need to prepare your vehicle to adjust your high beams in good conditions, here are the preparations to executed:
- Place your vehicle on a surface in front of a white wall for example, about 4 or 5 meters from the wall.
- Verify your tire pressure cautiously.
- Verify that the height adjustment knob for the lights is set to 0
- Try doing that with half a full tank.
- Remove all unnecessary weight from the automobile, just one person should be in the driver’s seat.
.
The headlight adjustment of his Dacia Sandero
Once your vehicle is in position, you will turn on your dipped beam and make a cross-shaped mark (one horizontal and one vertical section) in the middle of the beam that will be projected on the wall. Verify with a level that both parts of the cross are horizontal. Then back your vehicle up to a distance of between 7 and 10 metres. For the rest of the procedure here are the steps to stick to:
- Open your hood, identify the screws for horizontal and vertical control of the headlights of your Dacia Sandero (they are usually marked, and those on top must adjust the verticality and the one on the side manages the horizontality of the adjustment).
- Use a cloth or something else to hide the projector on which you are not making the modification.
- Using the screws to make the horizontal modification, you should have the most intense part of the beam which should be a little to the right of the vertical line noted on the wall
- With regard to vertical modification, you will have to use the screw to try to position the upper end of the beam at the level of the horizontal marking on the wall, or slightly down below.
- Once finished, verify that the headlights setting of your Dacia Sandero is logical, do not think twice to verify it after you have driven it, oftentimes it may move.
.
.
If you want to adjust the fog lights on your Dacia Sandero, please go through our content on this subject.
If you need more tutorials on the Dacia Sandero, go to our Dacia Sandero category.
