Whether you experience you can’t see as well at night, or you experience you’re lighting too low, or too high, in all these situations, there’s only one part of your vehicle responsible – your headlights, also known as high beams. Nevertheless this adjustment may seem easy thanks to the thumbwheel on your dashboard, a whole adjustment is much more complex than this elementary manipulation, and in this post, we are going to see how to adjust the headlights of your Dacia Sandero 2? To get this done, first we will see why you need to adjust your high beams, and secondly how to adjust the headlights of your Dacia Sandero 2.
Why adjust the headlights of your Dacia Sandero 2?
So let’s start our article with the interest of adjusting the headlights of your Dacia Sandero 2. For most people, our headlights are adjusted good enough, and they appear to light up enough at nighttime. However this is not constantly the circumstance and checking this setting, either because the headlights on your Dacia Sandero 2 are not bright enough, or because you have the impression that they are too weak is a good idea .
Adjusting the high beams of your Dacia Sandero 2 for safety
First of all, the headlight adjustment of a Dacia Sandero 2 must be carried out for a very easy safety explanation. Whether it’s for you, or for the other users you come across during your night trips. Obviously, if you don’t see enough, the risk is to fail to see an obstacle while traveling, or to predict a curve badly. Alternatively, if your headlights are too powerful, regardless if you are supposed to switch to low beam lights when you cross a vehicle, the time required to make this change will generally expose the driver in front of you to the headlight beam of your Dacia Sandero 2 . It is therefore essential for others as well as for you to have an ideal adjustment of your headlights.
Adjusting the headlights of a Dacia Sandero 2 for legal reasons
Furthermore to safety, there is a law that regulates the power, the adjustment of car headlights (articles R313-2 of the Highway Code), here is what it specifies: have between 2 and 4 headlights that illuminate at minimum 100 meters. Another legislation regulates their use, the European one (directive 76/756/EEC), which stipulates that there is no maximum height for the adjustment of the headlights, but that the maximum width of the beam must be equivalent to that of the dipped headlights and that the maximum luminosity must be 225, 000 cd.
How to adjust the headlights of a Dacia Sandero 2?
We will now move on to the part that concerns you the most in this post, how to adjust the headlights of his Dacia Sandero 2? This adjustment may seem a bit difficult, but by simply following the guidance you should have the ability to do it without too much trouble.
Preparations to adjust the headlights of a Dacia Sandero 2
First of all, you’ll need to prepare your vehicle to adjust your high beams in good conditions, here are the preparations to executed:
- Place your vehicle on a surface in front of a white wall for example, about 4 or 5 meters from the wall.
- Verify your tire pressure carefully.
- Verify that the height adjustment knob for the lights is set to 0
- Try doing that with half a full tank.
- Take out all needless weight from the vehicle, only one person should be in the driver’s seat.
.
The headlight adjustment of his Dacia Sandero 2
Once your vehicle is in place, you will turn on your dipped beam and make a cross-shaped mark (one horizontal and one vertical section) in the middle of the beam that will be projected on the wall. Verify with a level that both parts of the cross are straight. Then back your vehicle up to a distance of between 7 and 10 metres. For the rest of the procedure here are the steps to stick to:
- Open your hood, locate the screws for horizontal and vertical adjustment of the headlights of your Dacia Sandero 2 (they are usually designated, and those on top must adjust the verticality and the one on the side manages the horizontality of the adjustment).
- Use a cloth or something else to hide the projector on which you are not making the correction.
- Using the screws to make the horizontal correction, you should have the most intense part of the beam which should be a little to the right of the vertical line noted on the wall
- With regard to vertical correction, you will have to use the screw to try to position the upper end of the beam at the level of the horizontal marking on the wall, or slightly below.
- Once finished, verify that the headlights setting of your Dacia Sandero 2 is logical, do not hesitate to verify it after you have driven it, occasionally it may move.
.
.
If you want to adjust the fog lights on your Dacia Sandero 2, please read our article on this subject matter.
To discover more tips on the Dacia Sandero 2, take a look at the Dacia Sandero 2 category.
