Whether you experience you can’t see as well at night, or you experience you’re lighting too low, or too high, in all these circumstances, there’s only one part of your vehicle to blame – your headlights, also called high beams. Although this adjustment may seem easy thanks to the thumbwheel on your dashboard, a complete adjustment is much more technical than this basic manipulation, and in this article, we are going to find out how to adjust the headlights of your Citroen Jumpy 2? To achieve this, first we will find out why you need to adjust your high beams, and secondly how to adjust the headlights of your Citroen Jumpy 2.

adjust-headlights-citroen-jumpy-2

Why adjust the headlights of your Citroen Jumpy 2?

So let’s start our content page with the interest of adjusting the headlights of your Citroen Jumpy 2. For many of us, our headlights are adjusted sufficiently, and they appear to light up enough at nighttime. Sadly this is not constantly the circumstance and looking at this setting, either because the headlights on your Citroen Jumpy 2 are not bright enough, or because you have the impression that they are too weak is a wise decision .

Adjusting the high beams of your Citroen Jumpy 2 for safety

First of all, the headlight adjustment of a Citroen Jumpy 2 must be conducted for a simple safety motive. If it’s for you, or for the other users you come across during your night trips. Indeed, if you don’t see enough, the risk is to fail to see an obstacle on the road, or to anticipate a curve badly. Alternatively, if your headlights are too strong, regardless if you are meant to switch to low beam lights when you cross a vehicle, the time needed to make this switch will generally expose the driver in front of you to the headlight beam of your Citroen Jumpy 2 . It is consequently necessary for others as well as for you to have an optimal adjustment of your headlights.

Adjusting the headlights of a Citroen Jumpy 2 for legal reasons

Furthermore to safety, there is a law that supervises the power, the adjustment of motor vehicle headlights (articles R313-2 of the Highway Code), here is what it specifies: have between 2 and 4 headlights that illuminate at least 100 meters. Another legislation supervises their use, the European one (directive 76/756/EEC), which stipulates that there is no maximum height for the adjustment of the headlights, but that the maximum width of the beam must be equivalent to that of the dipped headlights and that the maximum luminosity must be 225, 000 cd.

How to adjust the headlights of a Citroen Jumpy 2?

We will now go forward to the part that concerns you the most in this article, how to adjust the headlights of his Citroen Jumpy 2? This adjustment may seem a bit complex, but by simply following the recommendations you should be able to complete it without too much problem.

Preparations to adjust the headlights of a Citroen Jumpy 2

First of all, you’ll need to prepare your vehicle to adjust your high beams in good conditions, here are the preparations to executed:

  • Place your vehicle on a surface in front of a white wall for example, about 4 or 5 meters from the wall.
  • Check your tire pressure attentively.
  • Check that the height adjustment knob for the lights is set to 0
  • .

  • Try doing that with half a full tank.
  • Take out all needless weight from the vehicle, just one person should be in the driver’s seat.

The headlight adjustment of his Citroen Jumpy 2

Once your car is in place, you will turn on your dipped beam and make a cross-shaped mark (one horizontal and one vertical section) in the middle of the beam that will be projected on the wall. Check with a level that both parts of the cross are straight. Then back your vehicle up to a distance of between 7 and 10 metres. For the rest of the procedure here are the steps to follow:

  • Open your bonnet, locate the screws for horizontal and vertical adjustment of the headlights of your Citroen Jumpy 2 (they are in most cases marked, and those on top must adjust the verticality and the one on the side handles the horizontality of the adjustment).
  • Use a cloth or another thing to hide the projector on which you are not making the correction.
  • Using the screws to make the horizontal correction, you should have the most intense part of the beam which should be a little to the right of the vertical line noted on the wall
  • .

  • With regard to vertical correction, you will have to use the screw to try to position the upper end of the beam at the level of the horizontal marking on the wall, or slightly below.
  • Once finished, verify that the headlights setting of your Citroen Jumpy 2 is logical, do not hesitate to verify it after you have driven it, often it may move.

.
If you want to adjust the fog lights on your Citroen Jumpy 2, please browse our content page on this subject matter.

If you want more guides on the Citroen Jumpy 2, go to our Citroen Jumpy 2 category.