Whether you feel you can’t see as well at night, or you feel you’re lighting too low, or too high, in all these cases, there’s only one part of your car at fault – your headlights, also identified as high beams. Nevertheless this adjustment may appear easy thanks to the thumbwheel on your dashboard, a whole adjustment is much more technical than this simple manipulation, and in this article, we are going to see how to adjust the headlights of your Citroen Jumper 2? To do this, first we will see why you need to adjust your high beams, and secondly how to adjust the headlights of your Citroen Jumper 2.
Why adjust the headlights of your Citroen Jumper 2?
So let’s start our content with the interest of adjusting the headlights of your Citroen Jumper 2. For many people, our headlights are adjusted sufficiently, and they seem to light up enough at nighttime. However this is not always the case and looking at this setting, either because the headlights on your Citroen Jumper 2 are not bright enough, or because you have the feeling that they are too weak is a wise decision .
Adjusting the high beams of your Citroen Jumper 2 for safety
First of all, the headlight adjustment of a Citroen Jumper 2 must be finished for a simple security explanation. Whether it’s for you, or for the other users you come across during your night trips. In fact, if you don’t see enough, the risk is to fail to see an obstacle on the road, or to anticipate a curve badly. Alternatively, if your headlights are too powerful, even if you are meant to switch to low beam lights when you cross a car, the time required to make this change will most of the time expose the driver in front of you to the headlight beam of your Citroen Jumper 2 . It is therefore important for others as well as for you to have an ideal adjustment of your headlights.
Adjusting the headlights of a Citroen Jumper 2 for legal reasons
In addition to security, there is a law that regulates the power, the adjustment of car headlights (articles R313-2 of the Highway Code), here is what it specifies: have between 2 and 4 headlights that illuminate at minimum 100 meters. Another legislation regulates their use, the European one (directive 76/756/EEC), which stipulates that there is no maximum height for the adjustment of the headlights, but that the maximum width of the beam must be very same to that of the dipped headlights and that the maximum luminosity must be 225, 000 cd.
How to adjust the headlights of a Citroen Jumper 2?
We will now go forward to the part that interests you the most in this article, how to adjust the headlights of his Citroen Jumper 2? This setting may appear a bit complex, but by following the recommendations you should have the ability to accomplish it without too much trouble.
Preparations to adjust the headlights of a Citroen Jumper 2
First of all, you’ll need to prepare your car to adjust your high beams in good conditions, here are the preparations to set up:
- Place your car on a surface in front of a white wall for example, about 4 or 5 meters from the wall.
- Check your tire pressure cautiously.
- Check that the height adjustment knob for the lights is set to 0
- Try doing that with half a full tank.
- Take out all unnecessary weight from the vehicle, just one person should be in the driver’s seat.
.
The headlight adjustment of his Citroen Jumper 2
Once your car is in position, you will turn on your dipped beam and make a cross-shaped mark (one horizontal and one vertical section) in the middle of the beam that will be projected on the wall. Check with a level that both parts of the cross are horizontal. Then back your car up to a distance of between 7 and 10 metres. For the rest of the process here are the steps to follow:
- Open your hood, find the screws for horizontal and vertical modification of the headlights of your Citroen Jumper 2 (they are usually marked, and those on top must modify the verticality and the one on the side handles the horizontality of the adjustment).
- Use a cloth or something else to hide the projector on which you are not making the modification.
- Using the screws to make the horizontal modification, you should have the most intense part of the beam which should be a little to the right of the vertical line marked on the wall
- With regard to vertical modification, you will have to use the screw to try to position the upper end of the beam at the level of the horizontal marking on the wall, or slightly below.
- Once finished, verify that the headlights setting of your Citroen Jumper 2 is coherent, do not think twice to verify it after you have driven it, in some cases it may move.
.
.
If you want to adjust the fog lights on your Citroen Jumper 2, please browse our content on this subject.
If you have any additional questions about the Citroen Jumper 2, do not hesitate to consult our Citroen Jumper 2 category.
