If you experience you can’t see as well at night, or you experience you’re lighting too low, or too high, in all these situations, there’s only one part of your vehicle responsible – your headlights, also identified as high beams. Although this adjustment may appear easy thanks to the thumbwheel on your dashboard, a whole adjustment is much more complex than this simple manipulation, and in this post, we are going to find out how to adjust the headlights of your Citroen Berlingo? To get this done, first we will find out why you need to adjust your high beams, and secondly how to adjust the headlights of your Citroen Berlingo.
Why adjust the headlights of your Citroen Berlingo?
So let’s start our content with the benefit of adjusting the headlights of your Citroen Berlingo. For most people, our headlights are adjusted well enough, and they seem to light up enough at night. Sadly this is not constantly the case and looking at this setting, either because the headlights on your Citroen Berlingo are not bright enough, or because you have the feeling that they are too weak is a good idea .
Adjusting the high beams of your Citroen Berlingo for safety
To begin with, the headlight adjustment of a Citroen Berlingo must be achieved for a basic safety motive. Whether it’s for you, or for the other users you come across during your night trips. In truth, if you don’t see enough, the risk is to miss an obstacle on the road, or to anticipate a curve badly. On the other hand, if your headlights are too powerful, even if you are expected to switch to low beam lights when you cross a car, the time needed to make this switch will generally expose the driver in front of you to the headlight beam of your Citroen Berlingo . It is consequently important for others as well as for you to have an ideal adjustment of your headlights.
Adjusting the headlights of a Citroen Berlingo for legal reasons
In addition to safety, there is a law that regulates the power, the adjustment of car headlights (articles R313-2 of the Highway Code), here is what it specifies: have between 2 and 4 headlights that illuminate at minimum 100 meters. Another legislation regulates their use, the European one (directive 76/756/EEC), which stipulates that there is no maximum height for the adjustment of the headlights, but that the maximum width of the beam must be very same to that of the dipped headlights and that the maximum luminosity must be 225, 000 cd.
How to adjust the headlights of a Citroen Berlingo?
We will now proceed to the section that interests you the most in this post, how to adjust the headlights of his Citroen Berlingo? This setting may appear a bit complicated, but by simply following the recommendations you should have the ability to accomplish it without too much issue.
Preparations to adjust the headlights of a Citroen Berlingo
To begin with, you’ll need to prepare your vehicle to adjust your high beams in good conditions, here are the preparations to executed:
- Place your vehicle on a surface in front of a white wall for example, about 4 or 5 meters from the wall.
- Verify your tire pressure attentively.
- Verify that the height adjustment knob for the lights is set to 0
- Try doing that with half a full tank.
- Remove all needless weight from the vehicle, only one person should be in the driver’s seat.
.
The headlight adjustment of his Citroen Berlingo
Once your car is in position, you will turn on your dipped beam and make a cross-shaped mark (one horizontal and one vertical section) in the middle of the beam that will be projected on the wall. Verify with a level that both parts of the cross are straight. Then back your vehicle up to a distance of between 7 and 10 metres. For the rest of the process here are the steps to stick to:
- Open your hood, identify the screws for horizontal and vertical control of the headlights of your Citroen Berlingo (they are generally designated, and those on top must modify the verticality and the one on the side handles the horizontality of the adjustment).
- Use a cloth or something else to hide the projector on which you are not making the modification.
- Using the screws to make the horizontal modification, you should have the most intense part of the beam which should be a little to the right of the vertical line noted on the wall
- With regard to vertical modification, you will have to use the screw to try to position the upper end of the beam at the level of the horizontal marking on the wall, or slightly down below.
- Once finished, check that the headlights setting of your Citroen Berlingo is coherent, do not think twice to check it after you have driven it, often it may move.
.
.
If you want to adjust the fog lights on your Citroen Berlingo, please go through our content on this subject.
If you wish more tutorials on the Citroen Berlingo, go to our Citroen Berlingo category.
