Whether you experience you can’t see as well at night, or you experience you’re lighting too low, or too high, in all these situations, there’s only one part of your vehicle to take responsibility – your headlights, also known as high beams. Although this adjustment may appear easy thanks to the thumbwheel on your dashboard, a whole adjustment is much more technical than this elementary manipulation, and in this post, we are going to see how to adjust the headlights of your Chevrolet Trax? To do this, first we will see why you need to adjust your high beams, and secondly how to adjust the headlights of your Chevrolet Trax.
Why adjust the headlights of your Chevrolet Trax?
So let’s start our content with the interest of adjusting the headlights of your Chevrolet Trax. For many people, our headlights are adjusted good enough, and they appear to light up enough at night. Unfortunately this is not always the circumstance and looking at this setting, either because the headlights on your Chevrolet Trax are not bright enough, or because you have the sensation that they are too weak is a good idea .
Adjusting the high beams of your Chevrolet Trax for safety
First of all, the headlight adjustment of a Chevrolet Trax must be conducted for a basic security explanation. Whether it’s for you, or for the other users you come across during your night trips. Obviously, if you don’t see enough, the risk is to fail to see an obstacle on the road, or to predict a curve badly. Alternatively, if your headlights are too strong, regardless if you are meant to switch to low beam lights when you pass a car, the time needed to make this change will most of the time expose the driver in front of you to the headlight beam of your Chevrolet Trax . It is therefore important for others as well as for you to have an ideal adjustment of your headlights.
Adjusting the headlights of a Chevrolet Trax for legal reasons
In addition to security, there is a law that regulates the power, the adjustment of car headlights (articles R313-2 of the Highway Code), here is what it suggests: have between 2 and 4 headlights that illuminate at minimum 100 meters. Another legislation regulates their use, the European one (directive 76/756/EEC), which stipulates that there is no maximum height for the adjustment of the headlights, but that the maximum width of the beam must be matching to that of the dipped headlights and that the maximum luminosity must be 225, 000 cd.
How to adjust the headlights of a Chevrolet Trax?
We will now proceed to the section that interests you the most in this post, how to adjust the headlights of his Chevrolet Trax? This adjustment may appear a bit complicated, but by simply following the instructions you should be able to complete it without too much trouble.
Preparations to adjust the headlights of a Chevrolet Trax
First of all, you’ll need to prepare your vehicle to adjust your high beams in good conditions, here are the preparations to set up:
- Place your vehicle on a surface in front of a white wall for example, about 4 or 5 meters from the wall.
- Check your tire pressure attentively.
- Check that the height adjustment knob for the lights is set to 0
- Try doing that with half a full tank.
- Remove all needless weight from the vehicle, only one person should be in the driver’s seat.
.
The headlight adjustment of his Chevrolet Trax
Once your vehicle is in position, you will turn on your dipped beam and make a cross-shaped mark (one horizontal and one vertical section) in the middle of the beam that will be projected on the wall. Check with a level that both parts of the cross are straight. Then back your vehicle up to a distance of between 7 and 10 metres. For the rest of the procedure here are the steps to follow:
- Open your bonnet, locate the screws for horizontal and vertical control of the headlights of your Chevrolet Trax (they are generally marked, and those on top must adjust the verticality and the one on the side adjusts the horizontality of the adjustment).
- Use a cloth or different things to hide the projector on which you are not making the adjustment.
- Using the screws to make the horizontal adjustment, you should have the most intense part of the beam which should be a little to the right of the vertical line noted on the wall
- With regard to vertical adjustment, you will have to use the screw to try to position the upper end of the beam at the level of the horizontal marking on the wall, or slightly below.
- Once finished, verify that the headlights setting of your Chevrolet Trax is coherent, do not hesitate to verify it after you have driven it, often it may move.
.
.
If you want to adjust the fog lights on your Chevrolet Trax, please go through our content on this subject.
To get more tips on the Chevrolet Trax, take a look at the Chevrolet Trax category.
