If you experience you can’t see as well at night, or you experience you’re lighting too low, or too high, in all these scenarios, there’s only one part of your vehicle to blame – your headlights, as well called high beams. Although this adjustment may appear easy thanks to the thumbwheel on your dashboard, a complete adjustment is much more complex than this simple manipulation, and in this article, we are going to find out how to adjust the headlights of your Chevrolet Traverse? To do this, first we will find out why you need to adjust your high beams, and secondly how to adjust the headlights of your Chevrolet Traverse.
Why adjust the headlights of your Chevrolet Traverse?
So let’s begin our content page with the benefit of adjusting the headlights of your Chevrolet Traverse. For the majority of us, our headlights are adjusted good enough, and they seem to light up enough during the night. However this is not always the case and checking this setting, either because the headlights on your Chevrolet Traverse are not bright enough, or because you have the impression that they are too weak is a great idea .
Adjusting the high beams of your Chevrolet Traverse for safety
To begin with, the headlight adjustment of a Chevrolet Traverse must be carried out for a basic security explanation. If it’s for you, or for the other users you come across during your night trips. Obviously, if you don’t see enough, the risk is to ignore an obstacle driving, or to anticipate a curve badly. On the other hand, if your headlights are too powerful, regardless if you are supposed to switch to low beam lights when you cross a car, the time required to make this change will most of the time expose the driver in front of you to the headlight beam of your Chevrolet Traverse . It is consequently important for others as well as for you to have an ideal adjustment of your headlights.
Adjusting the headlights of a Chevrolet Traverse for legal reasons
In addition to security, there is a law that regulates the power, the adjustment of motor vehicle headlights (articles R313-2 of the Highway Code), here is what it specifies: have between 2 and 4 headlights that illuminate at minimum 100 meters. Another legislation regulates their use, the European one (directive 76/756/EEC), which stipulates that there is no maximum height for the adjustment of the headlights, but that the maximum width of the beam must be identical to that of the dipped headlights and that the maximum luminosity must be 225, 000 cd.
How to adjust the headlights of a Chevrolet Traverse?
We will now move on to the part that interests you the most in this article, how to adjust the headlights of his Chevrolet Traverse? This adjustment may appear a bit complicated, but by following the guidelines you should be able to accomplish it without too much problem.
Preparations to adjust the headlights of a Chevrolet Traverse
To begin with, you’ll need to prepare your vehicle to adjust your high beams in good conditions, here are the preparations to put in place:
- Place your vehicle on a surface in front of a white wall for example, about 4 or 5 meters from the wall.
- Check your tire pressure attentively.
- Check that the height adjustment knob for the lights is set to 0
- Try doing that with half a full tank.
- Remove all unneeded weight from the automobile, just one person should be in the driver’s seat.
.
The headlight adjustment of his Chevrolet Traverse
Once your vehicle is in place, you will turn on your dipped beam and make a cross-shaped mark (one horizontal and one vertical section) in the middle of the beam that will be projected on the wall. Check with a level that both parts of the cross are horizontal. Then back your vehicle up to a distance of between 7 and 10 metres. For the rest of the procedure here are the steps to follow:
- Open your hood, find the screws for horizontal and vertical modification of the headlights of your Chevrolet Traverse (they are usually designated, and those on top must adjust the verticality and the one on the side handles the horizontality of the adjustment).
- Use a cloth or different things to hide the projector on which you are not making the modification.
- Using the screws to make the horizontal modification, you should have the most intense part of the beam which should be a little to the right of the vertical line marked on the wall
- With regard to vertical modification, you will have to use the screw to try to position the upper end of the beam at the level of the horizontal marking on the wall, or slightly below.
- Once finished, verify that the headlights setting of your Chevrolet Traverse is logical, do not hesitate to verify it after you have driven it, sometimes it may move.
.
.
If you want to adjust the fog lights on your Chevrolet Traverse, please go through our content page on this subject matter.
To discover more tips on the Chevrolet Traverse, take a look at the Chevrolet Traverse category.
