If you experience you can’t see as well at night, or you experience you’re lighting too low, or too high, in all these circumstances, there’s only one component of your car at fault – your headlights, also identified as high beams. Nevertheless this adjustment may appear easy thanks to the thumbwheel on your dashboard, a whole adjustment is much more technical than this simple manipulation, and in this post, we are going to see how to adjust the headlights of your Chevrolet Malibu? To do this, first we will see why you need to adjust your high beams, and secondly how to adjust the headlights of your Chevrolet Malibu.
Why adjust the headlights of your Chevrolet Malibu?
So let’s begin our content page with the benefit of adjusting the headlights of your Chevrolet Malibu. For most of us, our headlights are adjusted good enough, and they seem to light up enough through the night. However this is not always the circumstance and examining this setting, either because the headlights on your Chevrolet Malibu are not bright enough, or because you have the impression that they are too weak is a wise decision .
Adjusting the high beams of your Chevrolet Malibu for safety
To begin with, the headlight adjustment of a Chevrolet Malibu must be finished for a very easy security reason. Whether it’s for you, or for the other users you come across during your night trips. Obviously, if you don’t see enough, the risk is to ignore an obstacle on the road, or to anticipate a curve badly. However, if your headlights are too powerful, regardless if you are meant to switch to low beam lights when you pass a vehicle, the time needed to make this switch will most of the time expose the driver in front of you to the headlight beam of your Chevrolet Malibu . It is consequently necessary for others as well as for you to have an optimal adjustment of your headlights.
Adjusting the headlights of a Chevrolet Malibu for legal reasons
Furthermore to security, there is a law that regulates the power, the adjustment of motor vehicle headlights (articles R313-2 of the Highway Code), here is what it suggests: have between 2 and 4 headlights that illuminate at least 100 meters. Another legislation regulates their use, the European one (directive 76/756/EEC), which stipulates that there is no maximum height for the adjustment of the headlights, but that the maximum width of the beam must be identical to that of the dipped headlights and that the maximum luminosity must be 225, 000 cd.
How to adjust the headlights of a Chevrolet Malibu?
We will now go forward to the part that interests you the most in this post, how to adjust the headlights of his Chevrolet Malibu? This adjustment may appear a bit difficult, but by following the guidance you should be able to perform it without too much problem.
Preparations to adjust the headlights of a Chevrolet Malibu
To begin with, you’ll need to prepare your car to adjust your high beams in good conditions, here are the preparations to set up:
- Place your car on a surface in front of a white wall for example, about 4 or 5 meters from the wall.
- Check your tire pressure attentively.
- Check that the height adjustment knob for the lights is set to 0
- Try doing that with half a full tank.
- Take out all needless weight from the car, only one person should be in the driver’s seat.
.
The headlight adjustment of his Chevrolet Malibu
Once your vehicle is in position, you will turn on your dipped beam and make a cross-shaped mark (one horizontal and one vertical section) in the middle of the beam that will be projected on the wall. Check with a level that both parts of the cross are straight. Then back your car up to a distance of between 7 and 10 metres. For the rest of the process here are the steps to stick to:
- Open your hood, identify the screws for horizontal and vertical adjustment of the headlights of your Chevrolet Malibu (they are in most cases designated, and those on top must modify the verticality and the one on the side controls the horizontality of the adjustment).
- Use a cloth or something else to hide the projector on which you are not making the adjustment.
- Using the screws to make the horizontal adjustment, you should have the most intense component of the beam which should be a little to the right of the vertical line marked on the wall
- With regard to vertical adjustment, you will have to use the screw to try to position the upper end of the beam at the level of the horizontal marking on the wall, or slightly down below.
- Once finished, verify that the headlights setting of your Chevrolet Malibu is coherent, do not think twice to verify it after you have driven it, occasionally it may move.
.
.
If you want to adjust the fog lights on your Chevrolet Malibu, please browse our content page on this subject matter.
To discover more tips on the Chevrolet Malibu, take a look at the Chevrolet Malibu category.
