Whether you feel you can’t see as well at night, or you feel you’re lighting too low, or too high, in all these scenarios, there’s only one component of your car to blame – your headlights, also called high beams. Nevertheless this adjustment might seem easy thanks to the thumbwheel on your dashboard, a whole adjustment is much more complex than this basic manipulation, and in this article, we are going to discover how to adjust the headlights of your Chevrolet City Express? To do this, first we will discover why you need to adjust your high beams, and secondly how to adjust the headlights of your Chevrolet City Express.
Why adjust the headlights of your Chevrolet City Express?
So let’s start our content page with the benefit of adjusting the headlights of your Chevrolet City Express. For the majority of us, our headlights are adjusted sufficiently, and they appear to light up enough at night. However this is not always the circumstance and checking this setting, either because the headlights on your Chevrolet City Express are not bright enough, or because you have the feeling that they are too weak is a wise decision .
Adjusting the high beams of your Chevrolet City Express for safety
To begin with, the headlight adjustment of a Chevrolet City Express must be conducted for a simple security explanation. If it’s for you, or for the other users you come across during your night trips. In fact, if you don’t see enough, the risk is to miss out an obstacle while traveling, or to anticipate a curve badly. However, if your headlights are too powerful, even if you are meant to switch to low beam lights when you cross a vehicle, the time needed to make this change will generally expose the driver in front of you to the headlight beam of your Chevrolet City Express . It is consequently necessary for others as well as for you to have an optimal adjustment of your headlights.
Adjusting the headlights of a Chevrolet City Express for legal reasons
Furthermore to security, there is a law that regulates the power, the adjustment of car headlights (articles R313-2 of the Highway Code), here is what it suggests: have between 2 and 4 headlights that illuminate at minimum 100 meters. Another legislation regulates their use, the European one (directive 76/756/EEC), which stipulates that there is no maximum height for the adjustment of the headlights, but that the maximum width of the beam must be identical to that of the dipped headlights and that the maximum luminosity must be 225, 000 cd.
How to adjust the headlights of a Chevrolet City Express?
We will now move on to the section that concerns you the most in this article, how to adjust the headlights of his Chevrolet City Express? This setting might seem a bit complex, but by simply following the guidelines you should have the ability to accomplish it without too much problem.
Preparations to adjust the headlights of a Chevrolet City Express
To begin with, you’ll need to prepare your car to adjust your high beams in good conditions, here are the preparations to set up:
- Place your car on a surface in front of a white wall for example, about 4 or 5 meters from the wall.
- Check your tire pressure cautiously.
- Check that the height adjustment knob for the lights is set to 0
- Try doing that with half a full tank.
- Take out all unneeded weight from the automobile, just one person should be in the driver’s seat.
.
The headlight adjustment of his Chevrolet City Express
Once your car is in place, you will turn on your dipped beam and make a cross-shaped mark (one horizontal and one vertical section) in the middle of the beam that will be projected on the wall. Check with a level that both parts of the cross are straight. Then back your car up to a distance of between 7 and 10 metres. For the rest of the procedure here are the steps to follow:
- Open your bonnet, identify the screws for horizontal and vertical adjustment of the headlights of your Chevrolet City Express (they are in general designated, and those on top must adjust the verticality and the one on the side handles the horizontality of the adjustment).
- Use a cloth or something else to hide the projector on which you are not making the correction.
- Using the screws to make the horizontal correction, you should have the most intense component of the beam which should be a little to the right of the vertical line noted on the wall
- With regard to vertical correction, you will have to use the screw to try to position the upper end of the beam at the level of the horizontal marking on the wall, or slightly down below.
- Once finished, verify that the headlights setting of your Chevrolet City Express is logical, do not think twice to verify it after you have driven it, often it may move.
.
.
If you want to adjust the fog lights on your Chevrolet City Express, please go through our content page on this subject matter.
If you have any additional questions about the Chevrolet City Express, do not hesitate to consult our Chevrolet City Express category.
