Whether you experience you can’t see as well at night, or you experience you’re lighting too low, or too high, in all these cases, there’s only one part of your car guilty – your headlights, also known as high beams. Nevertheless this adjustment may seem easy thanks to the thumbwheel on your dashboard, a complete adjustment is much more technical than this simple manipulation, and in this post, we are going to find out how to adjust the headlights of your Chevrolet Camaro? To get this done, first we will find out why you need to adjust your high beams, and secondly how to adjust the headlights of your Chevrolet Camaro.

adjust-headlights-chevrolet-camaro

Why adjust the headlights of your Chevrolet Camaro?

So let’s start our article with the interest of adjusting the headlights of your Chevrolet Camaro. For the majority of us, our headlights are adjusted sufficiently, and they seem to light up enough at night. Regrettably this is not always the case and examining this setting, either because the headlights on your Chevrolet Camaro are not bright enough, or because you have the feeling that they are too weak is a good idea .

Adjusting the high beams of your Chevrolet Camaro for safety

First of all, the headlight adjustment of a Chevrolet Camaro must be conducted for a simple safety explanation. Whether it’s for you, or for the other users you come across during your night trips. Obviously, if you don’t see enough, the risk is to miss out an obstacle while traveling, or to anticipate a curve badly. However, if your headlights are too strong, regardless if you are meant to switch to low beam lights when you pass a vehicle, the time needed to make this change will generally expose the driver in front of you to the headlight beam of your Chevrolet Camaro . It is consequently necessary for others as well as for you to have an ideal adjustment of your headlights.

Adjusting the headlights of a Chevrolet Camaro for legal reasons

In addition to safety, there is a law that regulates the power, the adjustment of motor vehicle headlights (articles R313-2 of the Highway Code), here is what it suggests: have between 2 and 4 headlights that illuminate at least 100 meters. Another legislation regulates their use, the European one (directive 76/756/EEC), which stipulates that there is no maximum height for the adjustment of the headlights, but that the maximum width of the beam must be identical to that of the dipped headlights and that the maximum luminosity must be 225, 000 cd.

How to adjust the headlights of a Chevrolet Camaro?

We will now proceed to the section that interests you the most in this post, how to adjust the headlights of his Chevrolet Camaro? This adjustment may seem a bit complex, but by simply following the guidelines you should be able to accomplish it without too much concern.

Preparations to adjust the headlights of a Chevrolet Camaro

First of all, you’ll need to prepare your car to adjust your high beams in good conditions, here are the preparations to put in place:

  • Place your car on a surface in front of a white wall for example, about 4 or 5 meters from the wall.
  • Verify your tire pressure cautiously.
  • Verify that the height adjustment knob for the lights is set to 0
  • .

  • Try doing that with half a full tank.
  • Take out all needless weight from the automobile, only one person should be in the driver’s seat.

The headlight adjustment of his Chevrolet Camaro

Once your vehicle is in place, you will turn on your dipped beam and make a cross-shaped mark (one horizontal and one vertical section) in the middle of the beam that will be projected on the wall. Verify with a level that both parts of the cross are straight. Then back your car up to a distance of between 7 and 10 metres. For the rest of the procedure here are the steps to stick to:

  • Open your bonnet, locate the screws for horizontal and vertical adjustment of the headlights of your Chevrolet Camaro (they are usually designated, and those on top must adjust the verticality and the one on the side handles the horizontality of the adjustment).
  • Use a cloth or different things to hide the projector on which you are not making the adjustment.
  • Using the screws to make the horizontal adjustment, you should have the most intense part of the beam which should be a little to the right of the vertical line noted on the wall
  • .

  • With regard to vertical adjustment, you will have to use the screw to try to position the upper end of the beam at the level of the horizontal marking on the wall, or slightly down below.
  • Once finished, verify that the headlights setting of your Chevrolet Camaro is coherent, do not think twice to verify it after you have driven it, sometimes it may move.

.
If you want to adjust the fog lights on your Chevrolet Camaro, please read our article on this subject.

To get more tips on the Chevrolet Camaro, take a look at the Chevrolet Camaro category.