Whether you feel you can’t see as well at night, or you feel you’re lighting too low, or too high, in all these situations, there’s only one component of your vehicle to blame – your headlights, as well identified as high beams. Although this adjustment may appear easy thanks to the thumbwheel on your dashboard, a complete adjustment is much more technical than this simple manipulation, and in this article, we are going to see how to adjust the headlights of your Chevrolet Bolt? To achieve this, first we will see why you need to adjust your high beams, and secondly how to adjust the headlights of your Chevrolet Bolt.
Why adjust the headlights of your Chevrolet Bolt?
So let’s begin our content with the benefit of adjusting the headlights of your Chevrolet Bolt. For many of us, our headlights are adjusted well enough, and they seem to light up enough through the night. However this is not always the case and examining this setting, either because the headlights on your Chevrolet Bolt are not bright enough, or because you have the impression that they are too weak is a good idea .
Adjusting the high beams of your Chevrolet Bolt for safety
To begin with, the headlight adjustment of a Chevrolet Bolt must be done for a very easy security explanation. Whether it’s for you, or for the other users you come across during your night trips. In actual fact, if you don’t see enough, the risk is to miss out an obstacle driving, or to predict a curve badly. However, if your headlights are too powerful, even if you are expected to switch to low beam lights when you pass a car, the time needed to make this switch will most of the time expose the driver in front of you to the headlight beam of your Chevrolet Bolt . It is therefore essential for others as well as for you to have an optimal adjustment of your headlights.
Adjusting the headlights of a Chevrolet Bolt for legal reasons
In addition to security, there is a law that supervises the power, the adjustment of motor vehicle headlights (articles R313-2 of the Highway Code), here is what it specifies: have between 2 and 4 headlights that illuminate at least 100 meters. Another legislation supervises their use, the European one (directive 76/756/EEC), which stipulates that there is no maximum height for the adjustment of the headlights, but that the maximum width of the beam must be equivalent to that of the dipped headlights and that the maximum luminosity must be 225, 000 cd.
How to adjust the headlights of a Chevrolet Bolt?
We will now move on to the section that concerns you the most in this article, how to adjust the headlights of his Chevrolet Bolt? This setting may appear a bit difficult, but by following the guidelines you should have the ability to do it without too much issue.
Preparations to adjust the headlights of a Chevrolet Bolt
To begin with, you’ll need to prepare your vehicle to adjust your high beams in good conditions, here are the preparations to executed:
- Place your vehicle on a surface in front of a white wall for example, about 4 or 5 meters from the wall.
- Check your tire pressure cautiously.
- Check that the height adjustment knob for the lights is set to 0
- Try doing that with half a full tank.
- Remove all unneeded weight from the automobile, only one person should be in the driver’s seat.
.
The headlight adjustment of his Chevrolet Bolt
Once your vehicle is in position, you will turn on your dipped beam and make a cross-shaped mark (one horizontal and one vertical section) in the middle of the beam that will be projected on the wall. Check with a level that both parts of the cross are straight. Then back your vehicle up to a distance of between 7 and 10 metres. For the rest of the procedure here are the steps to stick to:
- Open your bonnet, identify the screws for horizontal and vertical modification of the headlights of your Chevrolet Bolt (they are in general marked, and those on top must modify the verticality and the one on the side manages the horizontality of the adjustment).
- Use a cloth or another thing to hide the projector on which you are not making the correction.
- Using the screws to make the horizontal correction, you should have the most intense component of the beam which should be a little to the right of the vertical line marked on the wall
- With regard to vertical correction, you will have to use the screw to try to position the upper end of the beam at the level of the horizontal marking on the wall, or slightly down below.
- Once finished, check that the headlights setting of your Chevrolet Bolt is logical, do not think twice to check it after you have driven it, in some cases it may move.
.
.
If you want to adjust the fog lights on your Chevrolet Bolt, please read our content on this subject.
To discover more tips on the Chevrolet Bolt, take a look at the Chevrolet Bolt category.
