If you feel you can’t see as well at night, or you feel you’re lighting too low, or too high, in all these situations, there’s only one component of your car responsible – your headlights, also called high beams. Although this adjustment may seem easy thanks to the thumbwheel on your dashboard, a whole adjustment is much more complex than this basic manipulation, and in this article, we are going to see how to adjust the headlights of your Chevrolet Avalanche? To do this, first we will see why you need to adjust your high beams, and secondly how to adjust the headlights of your Chevrolet Avalanche.
Why adjust the headlights of your Chevrolet Avalanche?
So let’s start our content with the interest of adjusting the headlights of your Chevrolet Avalanche. For many of us, our headlights are adjusted well enough, and they appear to light up enough through the night. However this is not constantly the case and examining this setting, either because the headlights on your Chevrolet Avalanche are not bright enough, or because you have the impression that they are too weak is a wise decision .
Adjusting the high beams of your Chevrolet Avalanche for safety
To begin with, the headlight adjustment of a Chevrolet Avalanche must be made for a very easy safety motive. Regardless it’s for you, or for the other users you come across during your night trips. In actual fact, if you don’t see enough, the risk is to ignore an obstacle on your way, or to anticipate a curve badly. On the other hand, if your headlights are too powerful, regardless if you are supposed to switch to low beam lights when you cross a car, the time required to make this change will most of the time expose the driver in front of you to the headlight beam of your Chevrolet Avalanche . It is therefore important for others as well as for you to have an ideal adjustment of your headlights.
Adjusting the headlights of a Chevrolet Avalanche for legal reasons
Furthermore to safety, there is a law that supervises the power, the adjustment of car headlights (articles R313-2 of the Highway Code), here is what it suggests: have between 2 and 4 headlights that illuminate at minimum 100 meters. Another legislation supervises their use, the European one (directive 76/756/EEC), which stipulates that there is no maximum height for the adjustment of the headlights, but that the maximum width of the beam must be matching to that of the dipped headlights and that the maximum luminosity must be 225, 000 cd.
How to adjust the headlights of a Chevrolet Avalanche?
We will now proceed to the part that interests you the most in this article, how to adjust the headlights of his Chevrolet Avalanche? This adjustment may seem a bit complex, but by following the guidelines you should be able to accomplish it without too much trouble.
Preparations to adjust the headlights of a Chevrolet Avalanche
To begin with, you’ll need to prepare your car to adjust your high beams in good conditions, here are the preparations to put in place:
- Place your car on a surface in front of a white wall for example, about 4 or 5 meters from the wall.
- Verify your tire pressure attentively.
- Verify that the height adjustment knob for the lights is set to 0
- Try doing that with half a full tank.
- Remove all needless weight from the automobile, only one person should be in the driver’s seat.
.
The headlight adjustment of his Chevrolet Avalanche
Once your vehicle is in position, you will turn on your dipped beam and make a cross-shaped mark (one horizontal and one vertical section) in the middle of the beam that will be projected on the wall. Verify with a level that both parts of the cross are straight. Then back your car up to a distance of between 7 and 10 metres. For the rest of the process here are the steps to follow:
- Open your bonnet, locate the screws for horizontal and vertical modification of the headlights of your Chevrolet Avalanche (they are generally marked, and those on top must adjust the verticality and the one on the side handles the horizontality of the adjustment).
- Use a cloth or another thing to hide the projector on which you are not making the correction.
- Using the screws to make the horizontal correction, you should have the most intense component of the beam which should be a little to the right of the vertical line noted on the wall
- With regard to vertical correction, you will have to use the screw to try to position the upper end of the beam at the level of the horizontal marking on the wall, or slightly down below.
- Once finished, check that the headlights setting of your Chevrolet Avalanche is logical, do not think twice to check it after you have driven it, often it may move.
.
.
If you want to adjust the fog lights on your Chevrolet Avalanche, please browse our content on this subject.
To get more tips on the Chevrolet Avalanche, take a look at the Chevrolet Avalanche category.
