If you feel you can’t see as well at night, or you feel you’re lighting too low, or too high, in all these cases, there’s only one part of your car to blame – your headlights, also known as high beams. Nevertheless this adjustment may seem easy thanks to the thumbwheel on your dashboard, a complete adjustment is much more technical than this basic manipulation, and in this post, we are going to find out how to adjust the headlights of your Cadillac XT5? To do this, first we will find out why you need to adjust your high beams, and secondly how to adjust the headlights of your Cadillac XT5.
Why adjust the headlights of your Cadillac XT5?
So let’s begin our article with the benefit of adjusting the headlights of your Cadillac XT5. For many people, our headlights are adjusted well enough, and they seem to light up enough at nighttime. However this is not always the case and looking at this setting, either because the headlights on your Cadillac XT5 are not bright enough, or because you have the impression that they are too weak is a good idea .
Adjusting the high beams of your Cadillac XT5 for safety
To begin with, the headlight adjustment of a Cadillac XT5 must be finished for a basic security explanation. If it’s for you, or for the other users you come across during your night trips. In fact, if you don’t see enough, the risk is to fail to see an obstacle while traveling, or to predict a curve badly. Alternatively, if your headlights are too strong, even if you are expected to switch to low beam lights when you cross a vehicle, the time needed to make this switch will most of the time expose the driver in front of you to the headlight beam of your Cadillac XT5 . It is therefore important for others as well as for you to have an ideal adjustment of your headlights.
Adjusting the headlights of a Cadillac XT5 for legal reasons
Furthermore to security, there is a law that supervises the power, the adjustment of car headlights (articles R313-2 of the Highway Code), here is what it suggests: have between 2 and 4 headlights that illuminate at least 100 meters. Another legislation supervises their use, the European one (directive 76/756/EEC), which stipulates that there is no maximum height for the adjustment of the headlights, but that the maximum width of the beam must be identical to that of the dipped headlights and that the maximum luminosity must be 225, 000 cd.
How to adjust the headlights of a Cadillac XT5?
We will now go forward to the section that concerns you the most in this post, how to adjust the headlights of his Cadillac XT5? This adjustment may seem a bit difficult, but by following the recommendations you should be able to perform it without too much problem.
Preparations to adjust the headlights of a Cadillac XT5
To begin with, you’ll need to prepare your car to adjust your high beams in good conditions, here are the preparations to executed:
- Place your car on a surface in front of a white wall for example, about 4 or 5 meters from the wall.
- Verify your tire pressure carefully.
- Verify that the height adjustment knob for the lights is set to 0
- Try doing that with half a full tank.
- Take out all needless weight from the car, only one person should be in the driver’s seat.
.
The headlight adjustment of his Cadillac XT5
Once your vehicle is in place, you will turn on your dipped beam and make a cross-shaped mark (one horizontal and one vertical section) in the middle of the beam that will be projected on the wall. Verify with a level that both parts of the cross are straight. Then back your car up to a distance of between 7 and 10 metres. For the rest of the procedure here are the steps to follow:
- Open your hood, find the screws for horizontal and vertical control of the headlights of your Cadillac XT5 (they are usually designated, and those on top must modify the verticality and the one on the side manages the horizontality of the adjustment).
- Use a cloth or different things to hide the projector on which you are not making the modification.
- Using the screws to make the horizontal modification, you should have the most intense part of the beam which should be a little to the right of the vertical line marked on the wall
- With regard to vertical modification, you will have to use the screw to try to position the upper end of the beam at the level of the horizontal marking on the wall, or slightly down below.
- Once finished, check that the headlights setting of your Cadillac XT5 is logical, do not hesitate to check it after you have driven it, sometimes it may move.
.
.
If you want to adjust the fog lights on your Cadillac XT5, please read our article on this subject.
Whenever you have any additional questions about the Cadillac XT5, do not hesitate to consult our Cadillac XT5 category.
