Whether you experience you can’t see as well at night, or you experience you’re lighting too low, or too high, in all these situations, there’s only one part of your vehicle to blame – your headlights, as well often known as high beams. Although this adjustment may appear easy thanks to the thumbwheel on your dashboard, a whole adjustment is much more complex than this basic manipulation, and in this post, we are going to find out how to adjust the headlights of your Cadillac CT6? To do this, first we will find out why you need to adjust your high beams, and secondly how to adjust the headlights of your Cadillac CT6.
Why adjust the headlights of your Cadillac CT6?
So let’s start our content with the interest of adjusting the headlights of your Cadillac CT6. For many of us, our headlights are adjusted sufficiently, and they appear to light up enough after dark. Regrettably this is not constantly the circumstance and checking this setting, either because the headlights on your Cadillac CT6 are not bright enough, or because you have the feeling that they are too weak is a great idea .
Adjusting the high beams of your Cadillac CT6 for safety
To begin with, the headlight adjustment of a Cadillac CT6 must be finished for a very easy safety explanation. If it’s for you, or for the other users you come across during your night trips. In fact, if you don’t see enough, the risk is to miss out an obstacle on your way, or to predict a curve badly. Alternatively, if your headlights are too strong, regardless if you are meant to switch to low beam lights when you pass a car, the time needed to make this switch will most of the time expose the driver in front of you to the headlight beam of your Cadillac CT6 . It is therefore essential for others as well as for you to have an optimal adjustment of your headlights.
Adjusting the headlights of a Cadillac CT6 for legal reasons
Furthermore to safety, there is a law that supervises the power, the adjustment of motor vehicle headlights (articles R313-2 of the Highway Code), here is what it specifies: have between 2 and 4 headlights that illuminate at least 100 meters. Another legislation supervises their use, the European one (directive 76/756/EEC), which stipulates that there is no maximum height for the adjustment of the headlights, but that the maximum width of the beam must be very same to that of the dipped headlights and that the maximum luminosity must be 225, 000 cd.
How to adjust the headlights of a Cadillac CT6?
We will now go forward to the part that interests you the most in this post, how to adjust the headlights of his Cadillac CT6? This adjustment may appear a bit complex, but by simply following the instructions you should have the ability to perform it without too much problem.
Preparations to adjust the headlights of a Cadillac CT6
To begin with, you’ll need to prepare your vehicle to adjust your high beams in good conditions, here are the preparations to put in place:
- Place your vehicle on a surface in front of a white wall for example, about 4 or 5 meters from the wall.
- Check your tire pressure carefully.
- Check that the height adjustment knob for the lights is set to 0
- Try doing that with half a full tank.
- Remove all unneeded weight from the automobile, just one person should be in the driver’s seat.
.
The headlight adjustment of his Cadillac CT6
Once your vehicle is in place, you will turn on your dipped beam and make a cross-shaped mark (one horizontal and one vertical section) in the middle of the beam that will be projected on the wall. Check with a level that both parts of the cross are horizontal. Then back your vehicle up to a distance of between 7 and 10 metres. For the rest of the process here are the steps to stick to:
- Open your bonnet, identify the screws for horizontal and vertical modification of the headlights of your Cadillac CT6 (they are usually designated, and those on top must modify the verticality and the one on the side manages the horizontality of the adjustment).
- Use a cloth or different things to hide the projector on which you are not making the adjustment.
- Using the screws to make the horizontal adjustment, you should have the most intense part of the beam which should be a little to the right of the vertical line marked on the wall
- With regard to vertical adjustment, you will have to use the screw to try to position the upper end of the beam at the level of the horizontal marking on the wall, or slightly down below.
- Once finished, check that the headlights setting of your Cadillac CT6 is logical, do not think twice to check it after you have driven it, sometimes it may move.
.
.
If you want to adjust the fog lights on your Cadillac CT6, please go through our content on this subject matter.
To get more tips on the Cadillac CT6, take a look at the Cadillac CT6 category.
