If you experience you can’t see as well at night, or you experience you’re lighting too low, or too high, in all these scenarios, there’s only one part of your car responsible – your headlights, also often known as high beams. Although this adjustment might seem easy thanks to the thumbwheel on your dashboard, a whole adjustment is much more complex than this elementary manipulation, and in this article, we are going to see how to adjust the headlights of your Buick Lucerne? To achieve this, first we will see why you need to adjust your high beams, and secondly how to adjust the headlights of your Buick Lucerne.
Why adjust the headlights of your Buick Lucerne?
So let’s start our content page with the benefit of adjusting the headlights of your Buick Lucerne. For most people, our headlights are adjusted well enough, and they appear to light up enough at nighttime. Sadly this is not always the circumstance and examining this setting, either because the headlights on your Buick Lucerne are not bright enough, or because you have the impression that they are too weak is a great idea .
Adjusting the high beams of your Buick Lucerne for safety
First of all, the headlight adjustment of a Buick Lucerne must be done for a very easy safety reason. Whether it’s for you, or for the other users you come across during your night trips. In fact, if you don’t see enough, the risk is to ignore an obstacle driving, or to predict a curve badly. Alternatively, if your headlights are too powerful, even if you are expected to switch to low beam lights when you pass a car, the time required to make this switch will most of the time expose the driver in front of you to the headlight beam of your Buick Lucerne . It is consequently essential for others as well as for you to have an ideal adjustment of your headlights.
Adjusting the headlights of a Buick Lucerne for legal reasons
Furthermore to safety, there is a law that supervises the power, the adjustment of car headlights (articles R313-2 of the Highway Code), here is what it suggests: have between 2 and 4 headlights that illuminate at minimum 100 meters. Another legislation supervises their use, the European one (directive 76/756/EEC), which stipulates that there is no maximum height for the adjustment of the headlights, but that the maximum width of the beam must be very same to that of the dipped headlights and that the maximum luminosity must be 225, 000 cd.
How to adjust the headlights of a Buick Lucerne?
We will now proceed to the part that interests you the most in this article, how to adjust the headlights of his Buick Lucerne? This setting might seem a bit complicated, but by simply following the instructions you should have the ability to do it without too much trouble.
Preparations to adjust the headlights of a Buick Lucerne
First of all, you’ll need to prepare your car to adjust your high beams in good conditions, here are the preparations to executed:
- Place your car on a surface in front of a white wall for example, about 4 or 5 meters from the wall.
- Check your tire pressure carefully.
- Check that the height adjustment knob for the lights is set to 0
- Try doing that with half a full tank.
- Remove all needless weight from the car, just one person should be in the driver’s seat.
.
The headlight adjustment of his Buick Lucerne
Once your vehicle is in position, you will turn on your dipped beam and make a cross-shaped mark (one horizontal and one vertical section) in the middle of the beam that will be projected on the wall. Check with a level that both parts of the cross are horizontal. Then back your car up to a distance of between 7 and 10 metres. For the rest of the procedure here are the steps to stick to:
- Open your hood, find the screws for horizontal and vertical control of the headlights of your Buick Lucerne (they are usually designated, and those on top must modify the verticality and the one on the side manages the horizontality of the adjustment).
- Use a cloth or another thing to hide the projector on which you are not making the correction.
- Using the screws to make the horizontal correction, you should have the most intense part of the beam which should be a little to the right of the vertical line marked on the wall
- With regard to vertical correction, you will have to use the screw to try to position the upper end of the beam at the level of the horizontal marking on the wall, or slightly below.
- Once finished, check that the headlights setting of your Buick Lucerne is coherent, do not think twice to check it after you have driven it, often it may move.
.
.
If you want to adjust the fog lights on your Buick Lucerne, please browse our content page on this subject matter.
In the event that you have any further questions about the Buick Lucerne, do not hesitate to consult our Buick Lucerne category.
