Whether you feel you can’t see as well at night, or you feel you’re lighting too low, or too high, in all these scenarios, there’s only one component of your car to blame – your headlights, as well identified as high beams. Although this adjustment might seem easy thanks to the thumbwheel on your dashboard, a whole adjustment is much more complex than this elementary manipulation, and in this post, we are going to find out how to adjust the headlights of your Buick Encore? To do this, first we will find out why you need to adjust your high beams, and secondly how to adjust the headlights of your Buick Encore.
Why adjust the headlights of your Buick Encore?
So let’s start our content page with the interest of adjusting the headlights of your Buick Encore. For many people, our headlights are adjusted sufficiently, and they seem to light up enough at night. Unfortunately this is not constantly the circumstance and looking at this setting, either because the headlights on your Buick Encore are not bright enough, or because you have the sensation that they are too weak is a wise decision .
Adjusting the high beams of your Buick Encore for safety
To begin with, the headlight adjustment of a Buick Encore must be conducted for a very easy safety motive. If it’s for you, or for the other users you come across during your night trips. In actual fact, if you don’t see enough, the risk is to ignore an obstacle while traveling, or to anticipate a curve badly. However, if your headlights are too powerful, even if you are expected to switch to low beam lights when you cross a car, the time required to make this switch will generally expose the driver in front of you to the headlight beam of your Buick Encore . It is consequently essential for others as well as for you to have an ideal adjustment of your headlights.
Adjusting the headlights of a Buick Encore for legal reasons
In addition to safety, there is a law that supervises the power, the adjustment of car headlights (articles R313-2 of the Highway Code), here is what it suggests: have between 2 and 4 headlights that illuminate at least 100 meters. Another legislation supervises their use, the European one (directive 76/756/EEC), which stipulates that there is no maximum height for the adjustment of the headlights, but that the maximum width of the beam must be very same to that of the dipped headlights and that the maximum luminosity must be 225, 000 cd.
How to adjust the headlights of a Buick Encore?
We will now go forward to the section that interests you the most in this post, how to adjust the headlights of his Buick Encore? This adjustment might seem a bit difficult, but by simply following the recommendations you should be able to perform it without too much trouble.
Preparations to adjust the headlights of a Buick Encore
To begin with, you’ll need to prepare your car to adjust your high beams in good conditions, here are the preparations to put in place:
- Place your car on a surface in front of a white wall for example, about 4 or 5 meters from the wall.
- Check your tire pressure carefully.
- Check that the height adjustment knob for the lights is set to 0
- Try doing that with half a full tank.
- Take out all unneeded weight from the car, only one person should be in the driver’s seat.
.
The headlight adjustment of his Buick Encore
Once your car is in place, you will turn on your dipped beam and make a cross-shaped mark (one horizontal and one vertical section) in the middle of the beam that will be projected on the wall. Check with a level that both parts of the cross are horizontal. Then back your car up to a distance of between 7 and 10 metres. For the rest of the procedure here are the steps to stick to:
- Open your bonnet, locate the screws for horizontal and vertical modification of the headlights of your Buick Encore (they are usually marked, and those on top must modify the verticality and the one on the side controls the horizontality of the adjustment).
- Use a cloth or different things to hide the projector on which you are not making the correction.
- Using the screws to make the horizontal correction, you should have the most intense component of the beam which should be a little to the right of the vertical line noted on the wall
- With regard to vertical correction, you will have to use the screw to try to position the upper end of the beam at the level of the horizontal marking on the wall, or slightly down below.
- Once finished, check that the headlights setting of your Buick Encore is coherent, do not think twice to check it after you have driven it, oftentimes it may move.
.
.
If you want to adjust the fog lights on your Buick Encore, please browse our content page on this subject.
If you wish more tutorials on the Buick Encore, go to our Buick Encore category.
