If you feel you can’t see as well at night, or you feel you’re lighting too low, or too high, in all these circumstances, there’s only one component of your vehicle to take responsibility – your headlights, as well identified as high beams. Although this adjustment may seem easy thanks to the thumbwheel on your dashboard, a whole adjustment is much more technical than this simple manipulation, and in this article, we are going to find out how to adjust the headlights of your BMW X6? To do this, first we will find out why you need to adjust your high beams, and secondly how to adjust the headlights of your BMW X6.

adjust-headlights-bmw-x6

Why adjust the headlights of your BMW X6?

So let’s start our content page with the benefit of adjusting the headlights of your BMW X6. For many people, our headlights are adjusted good enough, and they seem to light up enough through the night. Regrettably this is not always the case and checking this setting, either because the headlights on your BMW X6 are not bright enough, or because you have the impression that they are too weak is a good idea .

Adjusting the high beams of your BMW X6 for safety

To begin with, the headlight adjustment of a BMW X6 must be finished for a very easy safety motive. Whether it’s for you, or for the other users you come across during your night trips. In actual fact, if you don’t see enough, the risk is to ignore an obstacle on the road, or to predict a curve badly. Alternatively, if your headlights are too powerful, regardless if you are supposed to switch to low beam lights when you pass a car, the time required to make this switch will generally expose the driver in front of you to the headlight beam of your BMW X6 . It is consequently essential for others as well as for you to have an ideal adjustment of your headlights.

Adjusting the headlights of a BMW X6 for legal reasons

In addition to safety, there is a law that regulates the power, the adjustment of motor vehicle headlights (articles R313-2 of the Highway Code), here is what it specifies: have between 2 and 4 headlights that illuminate at least 100 meters. Another legislation regulates their use, the European one (directive 76/756/EEC), which stipulates that there is no maximum height for the adjustment of the headlights, but that the maximum width of the beam must be very same to that of the dipped headlights and that the maximum luminosity must be 225, 000 cd.

How to adjust the headlights of a BMW X6?

We will now move on to the part that interests you the most in this article, how to adjust the headlights of his BMW X6? This setting may seem a bit difficult, but by simply following the recommendations you should be able to complete it without too much trouble.

Preparations to adjust the headlights of a BMW X6

To begin with, you’ll need to prepare your vehicle to adjust your high beams in good conditions, here are the preparations to executed:

  • Place your vehicle on a surface in front of a white wall for example, about 4 or 5 meters from the wall.
  • Verify your tire pressure attentively.
  • Verify that the height adjustment knob for the lights is set to 0
  • .

  • Try doing that with half a full tank.
  • Take out all unneeded weight from the vehicle, only one person should be in the driver’s seat.

The headlight adjustment of his BMW X6

Once your vehicle is in position, you will turn on your dipped beam and make a cross-shaped mark (one horizontal and one vertical section) in the middle of the beam that will be projected on the wall. Verify with a level that both parts of the cross are horizontal. Then back your vehicle up to a distance of between 7 and 10 metres. For the rest of the procedure here are the steps to stick to:

  • Open your hood, locate the screws for horizontal and vertical modification of the headlights of your BMW X6 (they are in general designated, and those on top must modify the verticality and the one on the side controls the horizontality of the adjustment).
  • Use a cloth or something else to hide the projector on which you are not making the modification.
  • Using the screws to make the horizontal modification, you should have the most intense component of the beam which should be a little to the right of the vertical line marked on the wall
  • .

  • With regard to vertical modification, you will have to use the screw to try to position the upper end of the beam at the level of the horizontal marking on the wall, or slightly below.
  • Once finished, check that the headlights setting of your BMW X6 is logical, do not hesitate to check it after you have driven it, sometimes it may move.

.
If you want to adjust the fog lights on your BMW X6, please browse our content page on this subject.

If you need more tutorials on the BMW X6, go to our BMW X6 category.