If you experience you can’t see as well at night, or you experience you’re lighting too low, or too high, in all these situations, there’s only one part of your vehicle responsible – your headlights, also called high beams. Although this adjustment might seem easy thanks to the thumbwheel on your dashboard, a whole adjustment is much more complex than this elementary manipulation, and in this post, we are going to discover how to adjust the headlights of your BMW X1? To achieve this, first we will discover why you need to adjust your high beams, and secondly how to adjust the headlights of your BMW X1.
Why adjust the headlights of your BMW X1?
So let’s start our content with the interest of adjusting the headlights of your BMW X1. For many people, our headlights are adjusted sufficiently, and they appear to light up enough at night. Regrettably this is not constantly the case and examining this setting, either because the headlights on your BMW X1 are not bright enough, or because you have the sensation that they are too weak is a great idea .
Adjusting the high beams of your BMW X1 for safety
First of all, the headlight adjustment of a BMW X1 must be achieved for a very easy security explanation. Whether it’s for you, or for the other users you come across during your night trips. In truth, if you don’t see enough, the risk is to miss an obstacle while traveling, or to anticipate a curve badly. On the other hand, if your headlights are too strong, even if you are supposed to switch to low beam lights when you cross a car, the time needed to make this switch will most of the time expose the driver in front of you to the headlight beam of your BMW X1 . It is therefore important for others as well as for you to have an optimal adjustment of your headlights.
Adjusting the headlights of a BMW X1 for legal reasons
In addition to security, there is a law that regulates the power, the adjustment of car headlights (articles R313-2 of the Highway Code), here is what it suggests: have between 2 and 4 headlights that illuminate at minimum 100 meters. Another legislation regulates their use, the European one (directive 76/756/EEC), which stipulates that there is no maximum height for the adjustment of the headlights, but that the maximum width of the beam must be matching to that of the dipped headlights and that the maximum luminosity must be 225, 000 cd.
How to adjust the headlights of a BMW X1?
We will now go forward to the section that interests you the most in this post, how to adjust the headlights of his BMW X1? This setting might seem a bit complex, but by simply following the instructions you should have the ability to perform it without too much trouble.
Preparations to adjust the headlights of a BMW X1
First of all, you’ll need to prepare your vehicle to adjust your high beams in good conditions, here are the preparations to put in place:
- Place your vehicle on a surface in front of a white wall for example, about 4 or 5 meters from the wall.
- Check your tire pressure carefully.
- Check that the height adjustment knob for the lights is set to 0
- Try doing that with half a full tank.
- Remove all unneeded weight from the vehicle, just one person should be in the driver’s seat.
.
The headlight adjustment of his BMW X1
Once your car is in position, you will turn on your dipped beam and make a cross-shaped mark (one horizontal and one vertical section) in the middle of the beam that will be projected on the wall. Check with a level that both parts of the cross are straight. Then back your vehicle up to a distance of between 7 and 10 metres. For the rest of the procedure here are the steps to follow:
- Open your hood, identify the screws for horizontal and vertical control of the headlights of your BMW X1 (they are usually designated, and those on top must adjust the verticality and the one on the side controls the horizontality of the adjustment).
- Use a cloth or different things to hide the projector on which you are not making the modification.
- Using the screws to make the horizontal modification, you should have the most intense part of the beam which should be a little to the right of the vertical line noted on the wall
- With regard to vertical modification, you will have to use the screw to try to position the upper end of the beam at the level of the horizontal marking on the wall, or slightly below.
- Once finished, verify that the headlights setting of your BMW X1 is logical, do not think twice to verify it after you have driven it, occasionally it may move.
.
.
If you want to adjust the fog lights on your BMW X1, please read our content on this subject matter.
If you wish more tutorials on the BMW X1, go to our BMW X1 category.
