Whether you experience you can’t see as well at night, or you experience you’re lighting too low, or too high, in all these situations, there’s only one part of your vehicle guilty – your headlights, as well named high beams. Although this adjustment might seem easy thanks to the thumbwheel on your dashboard, a complete adjustment is much more complex than this elementary manipulation, and in this article, we are going to find out how to adjust the headlights of your Bmw Serie 7? To get this done, first we will find out why you need to adjust your high beams, and secondly how to adjust the headlights of your Bmw Serie 7.
Why adjust the headlights of your Bmw Serie 7?
So let’s start our content page with the benefit of adjusting the headlights of your Bmw Serie 7. For most people, our headlights are adjusted good enough, and they seem to light up enough through the night. However this is not always the circumstance and examining this setting, either because the headlights on your Bmw Serie 7 are not bright enough, or because you have the feeling that they are too weak is a good idea .
Adjusting the high beams of your Bmw Serie 7 for safety
First of all, the headlight adjustment of a Bmw Serie 7 must be achieved for a basic safety explanation. Regardless it’s for you, or for the other users you come across during your night trips. In actual fact, if you don’t see enough, the risk is to ignore an obstacle on your way, or to predict a curve badly. However, if your headlights are too strong, even if you are meant to switch to low beam lights when you pass a vehicle, the time required to make this change will most of the time expose the driver in front of you to the headlight beam of your Bmw Serie 7 . It is therefore important for others as well as for you to have an ideal adjustment of your headlights.
Adjusting the headlights of a Bmw Serie 7 for legal reasons
In addition to safety, there is a law that supervises the power, the adjustment of motor vehicle headlights (articles R313-2 of the Highway Code), here is what it specifies: have between 2 and 4 headlights that illuminate at minimum 100 meters. Another legislation supervises their use, the European one (directive 76/756/EEC), which stipulates that there is no maximum height for the adjustment of the headlights, but that the maximum width of the beam must be equivalent to that of the dipped headlights and that the maximum luminosity must be 225, 000 cd.
How to adjust the headlights of a Bmw Serie 7?
We will now proceed to the part that concerns you the most in this article, how to adjust the headlights of his Bmw Serie 7? This adjustment might seem a bit complicated, but by simply following the guidelines you should have the ability to accomplish it without too much concern.
Preparations to adjust the headlights of a Bmw Serie 7
First of all, you’ll need to prepare your vehicle to adjust your high beams in good conditions, here are the preparations to put in place:
- Place your vehicle on a surface in front of a white wall for example, about 4 or 5 meters from the wall.
- Verify your tire pressure cautiously.
- Verify that the height adjustment knob for the lights is set to 0
- Try doing that with half a full tank.
- Take out all needless weight from the car, only one person should be in the driver’s seat.
.
The headlight adjustment of his Bmw Serie 7
Once your car is in position, you will turn on your dipped beam and make a cross-shaped mark (one horizontal and one vertical section) in the middle of the beam that will be projected on the wall. Verify with a level that both parts of the cross are horizontal. Then back your vehicle up to a distance of between 7 and 10 metres. For the rest of the process here are the steps to stick to:
- Open your hood, locate the screws for horizontal and vertical adjustment of the headlights of your Bmw Serie 7 (they are usually marked, and those on top must modify the verticality and the one on the side handles the horizontality of the adjustment).
- Use a cloth or something else to hide the projector on which you are not making the adjustment.
- Using the screws to make the horizontal adjustment, you should have the most intense part of the beam which should be a little to the right of the vertical line marked on the wall
- With regard to vertical adjustment, you will have to use the screw to try to position the upper end of the beam at the level of the horizontal marking on the wall, or slightly down below.
- Once finished, verify that the headlights setting of your Bmw Serie 7 is logical, do not think twice to verify it after you have driven it, oftentimes it may move.
.
.
If you want to adjust the fog lights on your Bmw Serie 7, please go through our content page on this subject matter.
If you need more tutorials on the Bmw Serie 7, go to our Bmw Serie 7 category.
