Whether you feel you can’t see as well at night, or you feel you’re lighting too low, or too high, in all these circumstances, there’s only one component of your car at fault – your headlights, also named high beams. Although this adjustment may appear easy thanks to the thumbwheel on your dashboard, a complete adjustment is much more complex than this basic manipulation, and in this article, we are going to discover how to adjust the headlights of your Bmw Serie 6? To get this done, first we will discover why you need to adjust your high beams, and secondly how to adjust the headlights of your Bmw Serie 6.
Why adjust the headlights of your Bmw Serie 6?
So let’s begin our content page with the interest of adjusting the headlights of your Bmw Serie 6. For many of us, our headlights are adjusted well enough, and they appear to light up enough through the night. Sadly this is not always the circumstance and looking at this setting, either because the headlights on your Bmw Serie 6 are not bright enough, or because you have the sensation that they are too weak is a good idea .
Adjusting the high beams of your Bmw Serie 6 for safety
To begin with, the headlight adjustment of a Bmw Serie 6 must be done for a basic security reason. Regardless it’s for you, or for the other users you come across during your night trips. Obviously, if you don’t see enough, the risk is to fail to see an obstacle driving, or to predict a curve badly. On the other hand, if your headlights are too powerful, even if you are meant to switch to low beam lights when you cross a vehicle, the time required to make this change will generally expose the driver in front of you to the headlight beam of your Bmw Serie 6 . It is consequently important for others as well as for you to have an ideal adjustment of your headlights.
Adjusting the headlights of a Bmw Serie 6 for legal reasons
In addition to security, there is a law that regulates the power, the adjustment of motor vehicle headlights (articles R313-2 of the Highway Code), here is what it suggests: have between 2 and 4 headlights that illuminate at least 100 meters. Another legislation regulates their use, the European one (directive 76/756/EEC), which stipulates that there is no maximum height for the adjustment of the headlights, but that the maximum width of the beam must be identical to that of the dipped headlights and that the maximum luminosity must be 225, 000 cd.
How to adjust the headlights of a Bmw Serie 6?
We will now move on to the section that concerns you the most in this article, how to adjust the headlights of his Bmw Serie 6? This adjustment may appear a bit complicated, but by simply following the instructions you should have the ability to complete it without too much problem.
Preparations to adjust the headlights of a Bmw Serie 6
To begin with, you’ll need to prepare your car to adjust your high beams in good conditions, here are the preparations to set up:
- Place your car on a surface in front of a white wall for example, about 4 or 5 meters from the wall.
- Verify your tire pressure carefully.
- Verify that the height adjustment knob for the lights is set to 0
- Try doing that with half a full tank.
- Remove all unneeded weight from the automobile, only one person should be in the driver’s seat.
.
The headlight adjustment of his Bmw Serie 6
Once your vehicle is in position, you will turn on your dipped beam and make a cross-shaped mark (one horizontal and one vertical section) in the middle of the beam that will be projected on the wall. Verify with a level that both parts of the cross are straight. Then back your car up to a distance of between 7 and 10 metres. For the rest of the procedure here are the steps to stick to:
- Open your bonnet, find the screws for horizontal and vertical modification of the headlights of your Bmw Serie 6 (they are in most cases marked, and those on top must adjust the verticality and the one on the side manages the horizontality of the adjustment).
- Use a cloth or different things to hide the projector on which you are not making the modification.
- Using the screws to make the horizontal modification, you should have the most intense component of the beam which should be a little to the right of the vertical line noted on the wall
- With regard to vertical modification, you will have to use the screw to try to position the upper end of the beam at the level of the horizontal marking on the wall, or slightly below.
- Once finished, verify that the headlights setting of your Bmw Serie 6 is logical, do not think twice to verify it after you have driven it, occasionally it may move.
.
.
If you want to adjust the fog lights on your Bmw Serie 6, please browse our content page on this subject matter.
To discover more tips on the Bmw Serie 6, take a look at the Bmw Serie 6 category.
