If you feel you can’t see as well at night, or you feel you’re lighting too low, or too high, in all these scenarios, there’s only one component of your vehicle guilty – your headlights, as well named high beams. Although this adjustment may appear easy thanks to the thumbwheel on your dashboard, a complete adjustment is much more technical than this basic manipulation, and in this article, we are going to find out how to adjust the headlights of your Bmw Serie 3 E92? To achieve this, first we will find out why you need to adjust your high beams, and secondly how to adjust the headlights of your Bmw Serie 3 E92.

adjust-headlights-bmw-serie-3-e92

Why adjust the headlights of your Bmw Serie 3 E92?

So let’s begin our article with the benefit of adjusting the headlights of your Bmw Serie 3 E92. For most of us, our headlights are adjusted good enough, and they appear to light up enough during the night. Unfortunately this is not always the circumstance and examining this setting, either because the headlights on your Bmw Serie 3 E92 are not bright enough, or because you have the sensation that they are too weak is a good idea .

Adjusting the high beams of your Bmw Serie 3 E92 for safety

First of all, the headlight adjustment of a Bmw Serie 3 E92 must be conducted for a very easy safety explanation. If it’s for you, or for the other users you come across during your night trips. In fact, if you don’t see enough, the risk is to ignore an obstacle on your way, or to predict a curve badly. Alternatively, if your headlights are too powerful, regardless if you are meant to switch to low beam lights when you pass a vehicle, the time needed to make this change will generally expose the driver in front of you to the headlight beam of your Bmw Serie 3 E92 . It is consequently necessary for others as well as for you to have an ideal adjustment of your headlights.

Adjusting the headlights of a Bmw Serie 3 E92 for legal reasons

Furthermore to safety, there is a law that regulates the power, the adjustment of motor vehicle headlights (articles R313-2 of the Highway Code), here is what it specifies: have between 2 and 4 headlights that illuminate at least 100 meters. Another legislation regulates their use, the European one (directive 76/756/EEC), which stipulates that there is no maximum height for the adjustment of the headlights, but that the maximum width of the beam must be very same to that of the dipped headlights and that the maximum luminosity must be 225, 000 cd.

How to adjust the headlights of a Bmw Serie 3 E92?

We will now move on to the section that concerns you the most in this article, how to adjust the headlights of his Bmw Serie 3 E92? This adjustment may appear a bit complicated, but by simply following the recommendations you should have the ability to do it without too much problem.

Preparations to adjust the headlights of a Bmw Serie 3 E92

First of all, you’ll need to prepare your vehicle to adjust your high beams in good conditions, here are the preparations to set up:

  • Place your vehicle on a surface in front of a white wall for example, about 4 or 5 meters from the wall.
  • Check your tire pressure cautiously.
  • Check that the height adjustment knob for the lights is set to 0
  • .

  • Try doing that with half a full tank.
  • Take out all unnecessary weight from the automobile, only one person should be in the driver’s seat.

The headlight adjustment of his Bmw Serie 3 E92

Once your car is in position, you will turn on your dipped beam and make a cross-shaped mark (one horizontal and one vertical section) in the middle of the beam that will be projected on the wall. Check with a level that both parts of the cross are straight. Then back your vehicle up to a distance of between 7 and 10 metres. For the rest of the procedure here are the steps to follow:

  • Open your bonnet, locate the screws for horizontal and vertical control of the headlights of your Bmw Serie 3 E92 (they are usually marked, and those on top must modify the verticality and the one on the side adjusts the horizontality of the adjustment).
  • Use a cloth or something else to hide the projector on which you are not making the correction.
  • Using the screws to make the horizontal correction, you should have the most intense component of the beam which should be a little to the right of the vertical line noted on the wall
  • .

  • With regard to vertical correction, you will have to use the screw to try to position the upper end of the beam at the level of the horizontal marking on the wall, or slightly below.
  • Once finished, check that the headlights setting of your Bmw Serie 3 E92 is coherent, do not hesitate to check it after you have driven it, in some cases it may move.

.
If you want to adjust the fog lights on your Bmw Serie 3 E92, please go through our article on this subject.

If you want more guides on the Bmw Serie 3 E92, go to our Bmw Serie 3 E92 category.