Whether you feel you can’t see as well at night, or you feel you’re lighting too low, or too high, in all these cases, there’s only one component of your vehicle to blame – your headlights, as well called high beams. Nevertheless this adjustment might seem easy thanks to the thumbwheel on your dashboard, a whole adjustment is much more technical than this elementary manipulation, and in this article, we are going to see how to adjust the headlights of your Bmw Serie 2 F23? To get this done, first we will see why you need to adjust your high beams, and secondly how to adjust the headlights of your Bmw Serie 2 F23.
Why adjust the headlights of your Bmw Serie 2 F23?
So let’s begin our article with the benefit of adjusting the headlights of your Bmw Serie 2 F23. For most people, our headlights are adjusted good enough, and they appear to light up enough at nighttime. Regrettably this is not always the case and examining this setting, either because the headlights on your Bmw Serie 2 F23 are not bright enough, or because you have the feeling that they are too weak is a wise decision .
Adjusting the high beams of your Bmw Serie 2 F23 for safety
To begin with, the headlight adjustment of a Bmw Serie 2 F23 must be conducted for a basic security motive. Regardless it’s for you, or for the other users you come across during your night trips. Indeed, if you don’t see enough, the risk is to ignore an obstacle on the road, or to predict a curve badly. On the other hand, if your headlights are too powerful, regardless if you are expected to switch to low beam lights when you pass a vehicle, the time required to make this switch will generally expose the driver in front of you to the headlight beam of your Bmw Serie 2 F23 . It is therefore essential for others as well as for you to have an ideal adjustment of your headlights.
Adjusting the headlights of a Bmw Serie 2 F23 for legal reasons
In addition to security, there is a law that regulates the power, the adjustment of car headlights (articles R313-2 of the Highway Code), here is what it specifies: have between 2 and 4 headlights that illuminate at minimum 100 meters. Another legislation regulates their use, the European one (directive 76/756/EEC), which stipulates that there is no maximum height for the adjustment of the headlights, but that the maximum width of the beam must be very same to that of the dipped headlights and that the maximum luminosity must be 225, 000 cd.
How to adjust the headlights of a Bmw Serie 2 F23?
We will now go forward to the section that concerns you the most in this article, how to adjust the headlights of his Bmw Serie 2 F23? This setting might seem a bit difficult, but by simply following the instructions you should be able to complete it without too much problem.
Preparations to adjust the headlights of a Bmw Serie 2 F23
To begin with, you’ll need to prepare your vehicle to adjust your high beams in good conditions, here are the preparations to set up:
- Place your vehicle on a surface in front of a white wall for example, about 4 or 5 meters from the wall.
- Check your tire pressure cautiously.
- Check that the height adjustment knob for the lights is set to 0
- Try doing that with half a full tank.
- Remove all needless weight from the automobile, only one person should be in the driver’s seat.
.
The headlight adjustment of his Bmw Serie 2 F23
Once your car is in place, you will turn on your dipped beam and make a cross-shaped mark (one horizontal and one vertical section) in the middle of the beam that will be projected on the wall. Check with a level that both parts of the cross are horizontal. Then back your vehicle up to a distance of between 7 and 10 metres. For the rest of the process here are the steps to stick to:
- Open your hood, find the screws for horizontal and vertical control of the headlights of your Bmw Serie 2 F23 (they are in general designated, and those on top must modify the verticality and the one on the side handles the horizontality of the adjustment).
- Use a cloth or different things to hide the projector on which you are not making the adjustment.
- Using the screws to make the horizontal adjustment, you should have the most intense component of the beam which should be a little to the right of the vertical line noted on the wall
- With regard to vertical adjustment, you will have to use the screw to try to position the upper end of the beam at the level of the horizontal marking on the wall, or slightly down below.
- Once finished, check that the headlights setting of your Bmw Serie 2 F23 is logical, do not hesitate to check it after you have driven it, occasionally it may move.
.
.
If you want to adjust the fog lights on your Bmw Serie 2 F23, please go through our article on this subject matter.
To discover more tips on the Bmw Serie 2 F23, take a look at the Bmw Serie 2 F23 category.
