If you experience you can’t see as well at night, or you experience you’re lighting too low, or too high, in all these scenarios, there’s only one component of your car to blame – your headlights, also often known as high beams. Nevertheless this adjustment might seem easy thanks to the thumbwheel on your dashboard, a complete adjustment is much more technical than this elementary manipulation, and in this post, we are going to discover how to adjust the headlights of your Bmw Serie 1 E82? To achieve this, first we will discover why you need to adjust your high beams, and secondly how to adjust the headlights of your Bmw Serie 1 E82.
Why adjust the headlights of your Bmw Serie 1 E82?
So let’s start our content page with the interest of adjusting the headlights of your Bmw Serie 1 E82. For most people, our headlights are adjusted well enough, and they seem to light up enough through the night. Regrettably this is not constantly the case and examining this setting, either because the headlights on your Bmw Serie 1 E82 are not bright enough, or because you have the sensation that they are too weak is a good idea .
Adjusting the high beams of your Bmw Serie 1 E82 for safety
To begin with, the headlight adjustment of a Bmw Serie 1 E82 must be carried out for a simple safety reason. If it’s for you, or for the other users you come across during your night trips. Indeed, if you don’t see enough, the risk is to miss out an obstacle on your way, or to anticipate a curve badly. On the other hand, if your headlights are too powerful, even if you are meant to switch to low beam lights when you pass a car, the time needed to make this switch will generally expose the driver in front of you to the headlight beam of your Bmw Serie 1 E82 . It is consequently essential for others as well as for you to have an ideal adjustment of your headlights.
Adjusting the headlights of a Bmw Serie 1 E82 for legal reasons
In addition to safety, there is a law that regulates the power, the adjustment of motor vehicle headlights (articles R313-2 of the Highway Code), here is what it suggests: have between 2 and 4 headlights that illuminate at minimum 100 meters. Another legislation regulates their use, the European one (directive 76/756/EEC), which stipulates that there is no maximum height for the adjustment of the headlights, but that the maximum width of the beam must be equivalent to that of the dipped headlights and that the maximum luminosity must be 225, 000 cd.
How to adjust the headlights of a Bmw Serie 1 E82?
We will now proceed to the part that interests you the most in this post, how to adjust the headlights of his Bmw Serie 1 E82? This adjustment might seem a bit difficult, but by simply following the guidelines you should be able to complete it without too much problem.
Preparations to adjust the headlights of a Bmw Serie 1 E82
To begin with, you’ll need to prepare your car to adjust your high beams in good conditions, here are the preparations to put in place:
- Place your car on a surface in front of a white wall for example, about 4 or 5 meters from the wall.
- Check your tire pressure cautiously.
- Check that the height adjustment knob for the lights is set to 0
- Try doing that with half a full tank.
- Remove all needless weight from the vehicle, only one person should be in the driver’s seat.
.
The headlight adjustment of his Bmw Serie 1 E82
Once your vehicle is in position, you will turn on your dipped beam and make a cross-shaped mark (one horizontal and one vertical section) in the middle of the beam that will be projected on the wall. Check with a level that both parts of the cross are straight. Then back your car up to a distance of between 7 and 10 metres. For the rest of the process here are the steps to stick to:
- Open your hood, find the screws for horizontal and vertical adjustment of the headlights of your Bmw Serie 1 E82 (they are in most cases marked, and those on top must modify the verticality and the one on the side handles the horizontality of the adjustment).
- Use a cloth or different things to hide the projector on which you are not making the adjustment.
- Using the screws to make the horizontal adjustment, you should have the most intense component of the beam which should be a little to the right of the vertical line noted on the wall
- With regard to vertical adjustment, you will have to use the screw to try to position the upper end of the beam at the level of the horizontal marking on the wall, or slightly below.
- Once finished, check that the headlights setting of your Bmw Serie 1 E82 is logical, do not hesitate to check it after you have driven it, oftentimes it may move.
.
.
If you want to adjust the fog lights on your Bmw Serie 1 E82, please go through our content page on this subject matter.
To get more tips on the Bmw Serie 1 E82, take a look at the Bmw Serie 1 E82 category.
