Whether you experience you can’t see as well at night, or you experience you’re lighting too low, or too high, in all these cases, there’s only one part of your car responsible – your headlights, as well identified as high beams. Nevertheless this adjustment may appear easy thanks to the thumbwheel on your dashboard, a complete adjustment is much more technical than this elementary manipulation, and in this post, we are going to discover how to adjust the headlights of your Audi Tt? To do this, first we will discover why you need to adjust your high beams, and secondly how to adjust the headlights of your Audi Tt.
Why adjust the headlights of your Audi Tt?
So let’s begin our content with the interest of adjusting the headlights of your Audi Tt. For the majority of us, our headlights are adjusted good enough, and they appear to light up enough at night. Sadly this is not always the circumstance and examining this setting, either because the headlights on your Audi Tt are not bright enough, or because you have the impression that they are too weak is a great idea .
Adjusting the high beams of your Audi Tt for safety
To begin with, the headlight adjustment of a Audi Tt must be done for a basic security motive. Whether it’s for you, or for the other users you come across during your night trips. In truth, if you don’t see enough, the risk is to fail to see an obstacle on the road, or to predict a curve badly. On the other hand, if your headlights are too strong, regardless if you are expected to switch to low beam lights when you cross a car, the time required to make this switch will generally expose the driver in front of you to the headlight beam of your Audi Tt . It is therefore important for others as well as for you to have an optimal adjustment of your headlights.
Adjusting the headlights of a Audi Tt for legal reasons
In addition to security, there is a law that regulates the power, the adjustment of motor vehicle headlights (articles R313-2 of the Highway Code), here is what it specifies: have between 2 and 4 headlights that illuminate at minimum 100 meters. Another legislation regulates their use, the European one (directive 76/756/EEC), which stipulates that there is no maximum height for the adjustment of the headlights, but that the maximum width of the beam must be very same to that of the dipped headlights and that the maximum luminosity must be 225, 000 cd.
How to adjust the headlights of a Audi Tt?
We will now proceed to the part that interests you the most in this post, how to adjust the headlights of his Audi Tt? This setting may appear a bit complicated, but by simply following the recommendations you should be able to accomplish it without too much issue.
Preparations to adjust the headlights of a Audi Tt
To begin with, you’ll need to prepare your car to adjust your high beams in good conditions, here are the preparations to put in place:
- Place your car on a surface in front of a white wall for example, about 4 or 5 meters from the wall.
- Verify your tire pressure carefully.
- Verify that the height adjustment knob for the lights is set to 0
- Try doing that with half a full tank.
- Remove all unneeded weight from the vehicle, just one person should be in the driver’s seat.
.
The headlight adjustment of his Audi Tt
Once your car is in position, you will turn on your dipped beam and make a cross-shaped mark (one horizontal and one vertical section) in the middle of the beam that will be projected on the wall. Verify with a level that both parts of the cross are horizontal. Then back your car up to a distance of between 7 and 10 metres. For the rest of the process here are the steps to stick to:
- Open your bonnet, locate the screws for horizontal and vertical modification of the headlights of your Audi Tt (they are in most cases marked, and those on top must adjust the verticality and the one on the side controls the horizontality of the adjustment).
- Use a cloth or another thing to hide the projector on which you are not making the adjustment.
- Using the screws to make the horizontal adjustment, you should have the most intense part of the beam which should be a little to the right of the vertical line marked on the wall
- With regard to vertical adjustment, you will have to use the screw to try to position the upper end of the beam at the level of the horizontal marking on the wall, or slightly down below.
- Once finished, verify that the headlights setting of your Audi Tt is logical, do not think twice to verify it after you have driven it, oftentimes it may move.
.
.
If you want to adjust the fog lights on your Audi Tt, please read our content on this subject.
To get more tips on the Audi Tt, take a look at the Audi Tt category.
