Whether you experience you can’t see as well at night, or you experience you’re lighting too low, or too high, in all these cases, there’s only one part of your car at fault – your headlights, as well known as high beams. Nevertheless this adjustment might seem easy thanks to the thumbwheel on your dashboard, a whole adjustment is much more complex than this simple manipulation, and in this article, we are going to find out how to adjust the headlights of your Audi Sq7? To get this done, first we will find out why you need to adjust your high beams, and secondly how to adjust the headlights of your Audi Sq7.
Why adjust the headlights of your Audi Sq7?
So let’s begin our content with the interest of adjusting the headlights of your Audi Sq7. For many people, our headlights are adjusted good enough, and they seem to light up enough at night. Regrettably this is not constantly the case and looking at this setting, either because the headlights on your Audi Sq7 are not bright enough, or because you have the sensation that they are too weak is a wise decision .
Adjusting the high beams of your Audi Sq7 for safety
First of all, the headlight adjustment of a Audi Sq7 must be done for a basic safety motive. Whether it’s for you, or for the other users you come across during your night trips. In fact, if you don’t see enough, the risk is to miss out an obstacle on the road, or to anticipate a curve badly. On the other hand, if your headlights are too powerful, regardless if you are expected to switch to low beam lights when you cross a car, the time required to make this switch will generally expose the driver in front of you to the headlight beam of your Audi Sq7 . It is therefore essential for others as well as for you to have an optimal adjustment of your headlights.
Adjusting the headlights of a Audi Sq7 for legal reasons
Furthermore to safety, there is a law that regulates the power, the adjustment of motor vehicle headlights (articles R313-2 of the Highway Code), here is what it specifies: have between 2 and 4 headlights that illuminate at minimum 100 meters. Another legislation regulates their use, the European one (directive 76/756/EEC), which stipulates that there is no maximum height for the adjustment of the headlights, but that the maximum width of the beam must be identical to that of the dipped headlights and that the maximum luminosity must be 225, 000 cd.
How to adjust the headlights of a Audi Sq7?
We will now move on to the part that concerns you the most in this article, how to adjust the headlights of his Audi Sq7? This adjustment might seem a bit complex, but by simply following the instructions you should be able to complete it without too much problem.
Preparations to adjust the headlights of a Audi Sq7
First of all, you’ll need to prepare your car to adjust your high beams in good conditions, here are the preparations to executed:
- Place your car on a surface in front of a white wall for example, about 4 or 5 meters from the wall.
- Check your tire pressure attentively.
- Check that the height adjustment knob for the lights is set to 0
- Try doing that with half a full tank.
- Take out all needless weight from the car, just one person should be in the driver’s seat.
.
The headlight adjustment of his Audi Sq7
Once your vehicle is in position, you will turn on your dipped beam and make a cross-shaped mark (one horizontal and one vertical section) in the middle of the beam that will be projected on the wall. Check with a level that both parts of the cross are straight. Then back your car up to a distance of between 7 and 10 metres. For the rest of the procedure here are the steps to stick to:
- Open your hood, identify the screws for horizontal and vertical modification of the headlights of your Audi Sq7 (they are generally marked, and those on top must adjust the verticality and the one on the side manages the horizontality of the adjustment).
- Use a cloth or something else to hide the projector on which you are not making the modification.
- Using the screws to make the horizontal modification, you should have the most intense part of the beam which should be a little to the right of the vertical line noted on the wall
- With regard to vertical modification, you will have to use the screw to try to position the upper end of the beam at the level of the horizontal marking on the wall, or slightly below.
- Once finished, verify that the headlights setting of your Audi Sq7 is coherent, do not think twice to verify it after you have driven it, occasionally it may move.
.
.
If you want to adjust the fog lights on your Audi Sq7, please read our content on this subject matter.
If perhaps you have any additional questions about the Audi Sq7, do not hesitate to consult our Audi Sq7 category.
