Whether you feel you can’t see as well at night, or you feel you’re lighting too low, or too high, in all these scenarios, there’s only one part of your vehicle responsible – your headlights, as well called high beams. Although this adjustment may seem easy thanks to the thumbwheel on your dashboard, a complete adjustment is much more complex than this simple manipulation, and in this post, we are going to see how to adjust the headlights of your Audi Rs6? To get this done, first we will see why you need to adjust your high beams, and secondly how to adjust the headlights of your Audi Rs6.


Why adjust the headlights of your Audi Rs6?

So let’s start our article with the benefit of adjusting the headlights of your Audi Rs6. For the majority of us, our headlights are adjusted good enough, and they appear to light up enough at night. Sadly this is not constantly the case and examining this setting, either because the headlights on your Audi Rs6 are not bright enough, or because you have the impression that they are too weak is a good idea .

Adjusting the high beams of your Audi Rs6 for safety

To begin with, the headlight adjustment of a Audi Rs6 must be made for a very easy security reason. Regardless it’s for you, or for the other users you come across during your night trips. Indeed, if you don’t see enough, the risk is to fail to see an obstacle on your way, or to predict a curve badly. Alternatively, if your headlights are too powerful, even if you are meant to switch to low beam lights when you pass a car, the time needed to make this change will generally expose the driver in front of you to the headlight beam of your Audi Rs6 . It is consequently important for others as well as for you to have an ideal adjustment of your headlights.

Adjusting the headlights of a Audi Rs6 for legal reasons

In addition to security, there is a law that supervises the power, the adjustment of car headlights (articles R313-2 of the Highway Code), here is what it suggests: have between 2 and 4 headlights that illuminate at least 100 meters. Another legislation supervises their use, the European one (directive 76/756/EEC), which stipulates that there is no maximum height for the adjustment of the headlights, but that the maximum width of the beam must be equivalent to that of the dipped headlights and that the maximum luminosity must be 225, 000 cd.

How to adjust the headlights of a Audi Rs6?

We will now go forward to the section that interests you the most in this post, how to adjust the headlights of his Audi Rs6? This adjustment may seem a bit difficult, but by simply following the recommendations you should have the ability to do it without too much concern.

Preparations to adjust the headlights of a Audi Rs6

To begin with, you’ll need to prepare your vehicle to adjust your high beams in good conditions, here are the preparations to executed:

  • Place your vehicle on a surface in front of a white wall for example, about 4 or 5 meters from the wall.
  • Verify your tire pressure carefully.
  • Verify that the height adjustment knob for the lights is set to 0
  • .

  • Try doing that with half a full tank.
  • Remove all unneeded weight from the car, just one person should be in the driver’s seat.

The headlight adjustment of his Audi Rs6

Once your vehicle is in place, you will turn on your dipped beam and make a cross-shaped mark (one horizontal and one vertical section) in the middle of the beam that will be projected on the wall. Verify with a level that both parts of the cross are straight. Then back your vehicle up to a distance of between 7 and 10 metres. For the rest of the procedure here are the steps to stick to:

  • Open your bonnet, identify the screws for horizontal and vertical adjustment of the headlights of your Audi Rs6 (they are in most cases marked, and those on top must modify the verticality and the one on the side controls the horizontality of the adjustment).
  • Use a cloth or different things to hide the projector on which you are not making the adjustment.
  • Using the screws to make the horizontal adjustment, you should have the most intense part of the beam which should be a little to the right of the vertical line noted on the wall
  • .

  • With regard to vertical adjustment, you will have to use the screw to try to position the upper end of the beam at the level of the horizontal marking on the wall, or slightly below.
  • Once finished, verify that the headlights setting of your Audi Rs6 is coherent, do not think twice to verify it after you have driven it, oftentimes it may move.

If you want to adjust the fog lights on your Audi Rs6, please browse our article on this subject matter.

If you need more guides on the Audi Rs6, go to our Audi Rs6 category.