If you feel you can’t see as well at night, or you feel you’re lighting too low, or too high, in all these circumstances, there’s only one component of your vehicle to blame – your headlights, as well often known as high beams. Although this adjustment may seem easy thanks to the thumbwheel on your dashboard, a complete adjustment is much more technical than this elementary manipulation, and in this post, we are going to find out how to adjust the headlights of your Audi Q7? To do this, first we will find out why you need to adjust your high beams, and secondly how to adjust the headlights of your Audi Q7.

adjust-headlights-audi-q7

Why adjust the headlights of your Audi Q7?

So let’s start our article with the interest of adjusting the headlights of your Audi Q7. For many people, our headlights are adjusted well enough, and they seem to light up enough during the night. Sadly this is not constantly the circumstance and looking at this setting, either because the headlights on your Audi Q7 are not bright enough, or because you have the sensation that they are too weak is a great idea .

Adjusting the high beams of your Audi Q7 for safety

First of all, the headlight adjustment of a Audi Q7 must be done for a simple safety explanation. Whether it’s for you, or for the other users you come across during your night trips. Indeed, if you don’t see enough, the risk is to miss an obstacle on your way, or to predict a curve badly. However, if your headlights are too strong, even if you are meant to switch to low beam lights when you pass a vehicle, the time needed to make this switch will generally expose the driver in front of you to the headlight beam of your Audi Q7 . It is consequently necessary for others as well as for you to have an optimal adjustment of your headlights.

Adjusting the headlights of a Audi Q7 for legal reasons

In addition to safety, there is a law that regulates the power, the adjustment of motor vehicle headlights (articles R313-2 of the Highway Code), here is what it suggests: have between 2 and 4 headlights that illuminate at least 100 meters. Another legislation regulates their use, the European one (directive 76/756/EEC), which stipulates that there is no maximum height for the adjustment of the headlights, but that the maximum width of the beam must be matching to that of the dipped headlights and that the maximum luminosity must be 225, 000 cd.

How to adjust the headlights of a Audi Q7?

We will now move on to the section that concerns you the most in this post, how to adjust the headlights of his Audi Q7? This setting may seem a bit difficult, but by following the guidelines you should be able to perform it without too much problem.

Preparations to adjust the headlights of a Audi Q7

First of all, you’ll need to prepare your vehicle to adjust your high beams in good conditions, here are the preparations to put in place:

  • Place your vehicle on a surface in front of a white wall for example, about 4 or 5 meters from the wall.
  • Check your tire pressure carefully.
  • Check that the height adjustment knob for the lights is set to 0
  • .

  • Try doing that with half a full tank.
  • Take out all unnecessary weight from the automobile, just one person should be in the driver’s seat.

The headlight adjustment of his Audi Q7

Once your car is in place, you will turn on your dipped beam and make a cross-shaped mark (one horizontal and one vertical section) in the middle of the beam that will be projected on the wall. Check with a level that both parts of the cross are straight. Then back your vehicle up to a distance of between 7 and 10 metres. For the rest of the procedure here are the steps to stick to:

  • Open your hood, identify the screws for horizontal and vertical modification of the headlights of your Audi Q7 (they are generally marked, and those on top must adjust the verticality and the one on the side controls the horizontality of the adjustment).
  • Use a cloth or another thing to hide the projector on which you are not making the correction.
  • Using the screws to make the horizontal correction, you should have the most intense component of the beam which should be a little to the right of the vertical line noted on the wall
  • .

  • With regard to vertical correction, you will have to use the screw to try to position the upper end of the beam at the level of the horizontal marking on the wall, or slightly down below.
  • Once finished, check that the headlights setting of your Audi Q7 is coherent, do not hesitate to check it after you have driven it, sometimes it may move.

.
If you want to adjust the fog lights on your Audi Q7, please go through our article on this subject.

To get more tips on the Audi Q7, take a look at the Audi Q7 category.