If you feel you can’t see as well at night, or you feel you’re lighting too low, or too high, in all these cases, there’s only one part of your vehicle to blame – your headlights, as well often known as high beams. Although this adjustment might seem easy thanks to the thumbwheel on your dashboard, a whole adjustment is much more complex than this simple manipulation, and in this post, we are going to find out how to adjust the headlights of your Audi Q5? To do this, first we will find out why you need to adjust your high beams, and secondly how to adjust the headlights of your Audi Q5.
Why adjust the headlights of your Audi Q5?
So let’s start our article with the interest of adjusting the headlights of your Audi Q5. For most of us, our headlights are adjusted sufficiently, and they seem to light up enough at nighttime. However this is not always the circumstance and checking this setting, either because the headlights on your Audi Q5 are not bright enough, or because you have the sensation that they are too weak is a great idea .
Adjusting the high beams of your Audi Q5 for safety
First of all, the headlight adjustment of a Audi Q5 must be carried out for a basic safety explanation. If it’s for you, or for the other users you come across during your night trips. Indeed, if you don’t see enough, the risk is to miss an obstacle driving, or to anticipate a curve badly. However, if your headlights are too strong, regardless if you are expected to switch to low beam lights when you pass a car, the time needed to make this change will most of the time expose the driver in front of you to the headlight beam of your Audi Q5 . It is consequently important for others as well as for you to have an ideal adjustment of your headlights.
Adjusting the headlights of a Audi Q5 for legal reasons
In addition to safety, there is a law that supervises the power, the adjustment of car headlights (articles R313-2 of the Highway Code), here is what it suggests: have between 2 and 4 headlights that illuminate at minimum 100 meters. Another legislation supervises their use, the European one (directive 76/756/EEC), which stipulates that there is no maximum height for the adjustment of the headlights, but that the maximum width of the beam must be identical to that of the dipped headlights and that the maximum luminosity must be 225, 000 cd.
How to adjust the headlights of a Audi Q5?
We will now proceed to the part that concerns you the most in this post, how to adjust the headlights of his Audi Q5? This adjustment might seem a bit difficult, but by simply following the guidance you should have the ability to do it without too much trouble.
Preparations to adjust the headlights of a Audi Q5
First of all, you’ll need to prepare your vehicle to adjust your high beams in good conditions, here are the preparations to put in place:
- Place your vehicle on a surface in front of a white wall for example, about 4 or 5 meters from the wall.
- Check your tire pressure carefully.
- Check that the height adjustment knob for the lights is set to 0
- Try doing that with half a full tank.
- Take out all needless weight from the automobile, just one person should be in the driver’s seat.
.
The headlight adjustment of his Audi Q5
Once your car is in place, you will turn on your dipped beam and make a cross-shaped mark (one horizontal and one vertical section) in the middle of the beam that will be projected on the wall. Check with a level that both parts of the cross are straight. Then back your vehicle up to a distance of between 7 and 10 metres. For the rest of the process here are the steps to follow:
- Open your hood, locate the screws for horizontal and vertical adjustment of the headlights of your Audi Q5 (they are in general marked, and those on top must modify the verticality and the one on the side handles the horizontality of the adjustment).
- Use a cloth or another thing to hide the projector on which you are not making the adjustment.
- Using the screws to make the horizontal adjustment, you should have the most intense part of the beam which should be a little to the right of the vertical line marked on the wall
- With regard to vertical adjustment, you will have to use the screw to try to position the upper end of the beam at the level of the horizontal marking on the wall, or slightly below.
- Once finished, check that the headlights setting of your Audi Q5 is logical, do not hesitate to check it after you have driven it, oftentimes it may move.
.
.
If you want to adjust the fog lights on your Audi Q5, please read our article on this subject.
If you wish more tutorials on the Audi Q5, go to our Audi Q5 category.
