If you experience you can’t see as well at night, or you experience you’re lighting too low, or too high, in all these cases, there’s only one component of your car responsible – your headlights, as well named high beams. Although this adjustment may appear easy thanks to the thumbwheel on your dashboard, a whole adjustment is much more technical than this simple manipulation, and in this post, we are going to discover how to adjust the headlights of your Audi A7? To achieve this, first we will discover why you need to adjust your high beams, and secondly how to adjust the headlights of your Audi A7.
Why adjust the headlights of your Audi A7?
So let’s begin our article with the benefit of adjusting the headlights of your Audi A7. For most people, our headlights are adjusted sufficiently, and they appear to light up enough at nighttime. Regrettably this is not constantly the circumstance and examining this setting, either because the headlights on your Audi A7 are not bright enough, or because you have the sensation that they are too weak is a great idea .
Adjusting the high beams of your Audi A7 for safety
To begin with, the headlight adjustment of a Audi A7 must be finished for a basic safety motive. Whether it’s for you, or for the other users you come across during your night trips. In actual fact, if you don’t see enough, the risk is to miss out an obstacle while traveling, or to anticipate a curve badly. Alternatively, if your headlights are too powerful, regardless if you are supposed to switch to low beam lights when you pass a car, the time required to make this change will generally expose the driver in front of you to the headlight beam of your Audi A7 . It is consequently necessary for others as well as for you to have an optimal adjustment of your headlights.
Adjusting the headlights of a Audi A7 for legal reasons
In addition to safety, there is a law that regulates the power, the adjustment of motor vehicle headlights (articles R313-2 of the Highway Code), here is what it specifies: have between 2 and 4 headlights that illuminate at least 100 meters. Another legislation regulates their use, the European one (directive 76/756/EEC), which stipulates that there is no maximum height for the adjustment of the headlights, but that the maximum width of the beam must be equivalent to that of the dipped headlights and that the maximum luminosity must be 225, 000 cd.
How to adjust the headlights of a Audi A7?
We will now go forward to the part that interests you the most in this post, how to adjust the headlights of his Audi A7? This setting may appear a bit complex, but by simply following the guidance you should have the ability to accomplish it without too much concern.
Preparations to adjust the headlights of a Audi A7
To begin with, you’ll need to prepare your car to adjust your high beams in good conditions, here are the preparations to set up:
- Place your car on a surface in front of a white wall for example, about 4 or 5 meters from the wall.
- Check your tire pressure attentively.
- Check that the height adjustment knob for the lights is set to 0
- Try doing that with half a full tank.
- Take out all needless weight from the automobile, only one person should be in the driver’s seat.
.
The headlight adjustment of his Audi A7
Once your vehicle is in position, you will turn on your dipped beam and make a cross-shaped mark (one horizontal and one vertical section) in the middle of the beam that will be projected on the wall. Check with a level that both parts of the cross are horizontal. Then back your car up to a distance of between 7 and 10 metres. For the rest of the procedure here are the steps to follow:
- Open your bonnet, find the screws for horizontal and vertical adjustment of the headlights of your Audi A7 (they are in general designated, and those on top must modify the verticality and the one on the side adjusts the horizontality of the adjustment).
- Use a cloth or something else to hide the projector on which you are not making the modification.
- Using the screws to make the horizontal modification, you should have the most intense component of the beam which should be a little to the right of the vertical line noted on the wall
- With regard to vertical modification, you will have to use the screw to try to position the upper end of the beam at the level of the horizontal marking on the wall, or slightly below.
- Once finished, check that the headlights setting of your Audi A7 is coherent, do not hesitate to check it after you have driven it, often it may move.
.
.
If you want to adjust the fog lights on your Audi A7, please go through our article on this subject matter.
To discover more tips on the Audi A7, take a look at the Audi A7 category.
