Whether you feel you can’t see as well at night, or you feel you’re lighting too low, or too high, in all these circumstances, there’s only one component of your car responsible – your headlights, also named high beams. Although this adjustment might seem easy thanks to the thumbwheel on your dashboard, a whole adjustment is much more complex than this simple manipulation, and in this post, we are going to discover how to adjust the headlights of your Audi A2? To get this done, first we will discover why you need to adjust your high beams, and secondly how to adjust the headlights of your Audi A2.
Why adjust the headlights of your Audi A2?
So let’s start our article with the benefit of adjusting the headlights of your Audi A2. For most of us, our headlights are adjusted sufficiently, and they appear to light up enough after dark. Sadly this is not constantly the case and checking this setting, either because the headlights on your Audi A2 are not bright enough, or because you have the feeling that they are too weak is a good idea .
Adjusting the high beams of your Audi A2 for safety
To begin with, the headlight adjustment of a Audi A2 must be finished for a simple safety explanation. If it’s for you, or for the other users you come across during your night trips. In actual fact, if you don’t see enough, the risk is to miss out an obstacle driving, or to predict a curve badly. Alternatively, if your headlights are too powerful, even if you are supposed to switch to low beam lights when you cross a car, the time required to make this change will most of the time expose the driver in front of you to the headlight beam of your Audi A2 . It is consequently necessary for others as well as for you to have an ideal adjustment of your headlights.
Adjusting the headlights of a Audi A2 for legal reasons
Furthermore to safety, there is a law that regulates the power, the adjustment of car headlights (articles R313-2 of the Highway Code), here is what it suggests: have between 2 and 4 headlights that illuminate at least 100 meters. Another legislation regulates their use, the European one (directive 76/756/EEC), which stipulates that there is no maximum height for the adjustment of the headlights, but that the maximum width of the beam must be identical to that of the dipped headlights and that the maximum luminosity must be 225, 000 cd.
How to adjust the headlights of a Audi A2?
We will now go forward to the section that concerns you the most in this post, how to adjust the headlights of his Audi A2? This setting might seem a bit difficult, but by simply following the guidance you should have the ability to perform it without too much problem.
Preparations to adjust the headlights of a Audi A2
To begin with, you’ll need to prepare your car to adjust your high beams in good conditions, here are the preparations to put in place:
- Place your car on a surface in front of a white wall for example, about 4 or 5 meters from the wall.
- Verify your tire pressure cautiously.
- Verify that the height adjustment knob for the lights is set to 0
- Try doing that with half a full tank.
- Take out all unnecessary weight from the vehicle, only one person should be in the driver’s seat.
.
The headlight adjustment of his Audi A2
Once your vehicle is in place, you will turn on your dipped beam and make a cross-shaped mark (one horizontal and one vertical section) in the middle of the beam that will be projected on the wall. Verify with a level that both parts of the cross are straight. Then back your car up to a distance of between 7 and 10 metres. For the rest of the process here are the steps to follow:
- Open your bonnet, identify the screws for horizontal and vertical control of the headlights of your Audi A2 (they are usually marked, and those on top must adjust the verticality and the one on the side manages the horizontality of the adjustment).
- Use a cloth or something else to hide the projector on which you are not making the correction.
- Using the screws to make the horizontal correction, you should have the most intense component of the beam which should be a little to the right of the vertical line marked on the wall
- With regard to vertical correction, you will have to use the screw to try to position the upper end of the beam at the level of the horizontal marking on the wall, or slightly down below.
- Once finished, check that the headlights setting of your Audi A2 is logical, do not think twice to check it after you have driven it, often it may move.
.
.
If you want to adjust the fog lights on your Audi A2, please read our article on this subject matter.
If you wish more tutorials on the Audi A2, go to our Audi A2 category.
