If you experience you can’t see as well at night, or you experience you’re lighting too low, or too high, in all these scenarios, there’s only one part of your car to blame – your headlights, also known as high beams. Nevertheless this adjustment may appear easy thanks to the thumbwheel on your dashboard, a whole adjustment is much more technical than this elementary manipulation, and in this post, we are going to find out how to adjust the headlights of your Audi A1? To do this, first we will find out why you need to adjust your high beams, and secondly how to adjust the headlights of your Audi A1.
Why adjust the headlights of your Audi A1?
So let’s begin our content with the benefit of adjusting the headlights of your Audi A1. For the majority of us, our headlights are adjusted good enough, and they appear to light up enough at nighttime. However this is not always the case and examining this setting, either because the headlights on your Audi A1 are not bright enough, or because you have the sensation that they are too weak is a good idea .
Adjusting the high beams of your Audi A1 for safety
To begin with, the headlight adjustment of a Audi A1 must be conducted for a basic security reason. Whether it’s for you, or for the other users you come across during your night trips. In truth, if you don’t see enough, the risk is to fail to see an obstacle driving, or to anticipate a curve badly. Alternatively, if your headlights are too strong, regardless if you are meant to switch to low beam lights when you pass a vehicle, the time required to make this switch will generally expose the driver in front of you to the headlight beam of your Audi A1 . It is consequently important for others as well as for you to have an ideal adjustment of your headlights.
Adjusting the headlights of a Audi A1 for legal reasons
Furthermore to security, there is a law that supervises the power, the adjustment of motor vehicle headlights (articles R313-2 of the Highway Code), here is what it specifies: have between 2 and 4 headlights that illuminate at minimum 100 meters. Another legislation supervises their use, the European one (directive 76/756/EEC), which stipulates that there is no maximum height for the adjustment of the headlights, but that the maximum width of the beam must be equivalent to that of the dipped headlights and that the maximum luminosity must be 225, 000 cd.
How to adjust the headlights of a Audi A1?
We will now proceed to the section that concerns you the most in this post, how to adjust the headlights of his Audi A1? This adjustment may appear a bit complex, but by simply following the guidance you should be able to accomplish it without too much concern.
Preparations to adjust the headlights of a Audi A1
To begin with, you’ll need to prepare your car to adjust your high beams in good conditions, here are the preparations to executed:
- Place your car on a surface in front of a white wall for example, about 4 or 5 meters from the wall.
- Check your tire pressure attentively.
- Check that the height adjustment knob for the lights is set to 0
- Try doing that with half a full tank.
- Take out all needless weight from the automobile, just one person should be in the driver’s seat.
.
The headlight adjustment of his Audi A1
Once your vehicle is in position, you will turn on your dipped beam and make a cross-shaped mark (one horizontal and one vertical section) in the middle of the beam that will be projected on the wall. Check with a level that both parts of the cross are horizontal. Then back your car up to a distance of between 7 and 10 metres. For the rest of the procedure here are the steps to follow:
- Open your bonnet, identify the screws for horizontal and vertical adjustment of the headlights of your Audi A1 (they are generally designated, and those on top must modify the verticality and the one on the side controls the horizontality of the adjustment).
- Use a cloth or different things to hide the projector on which you are not making the adjustment.
- Using the screws to make the horizontal adjustment, you should have the most intense part of the beam which should be a little to the right of the vertical line marked on the wall
- With regard to vertical adjustment, you will have to use the screw to try to position the upper end of the beam at the level of the horizontal marking on the wall, or slightly down below.
- Once finished, check that the headlights setting of your Audi A1 is logical, do not think twice to check it after you have driven it, oftentimes it may move.
.
.
If you want to adjust the fog lights on your Audi A1, please read our content on this subject.
To get more tips on the Audi A1, take a look at the Audi A1 category.
