Whether you experience you can’t see as well at night, or you experience you’re lighting too low, or too high, in all these scenarios, there’s only one component of your vehicle to take responsibility – your headlights, as well often known as high beams. Nevertheless this adjustment may appear easy thanks to the thumbwheel on your dashboard, a complete adjustment is much more complex than this elementary manipulation, and in this article, we are going to discover how to adjust the headlights of your Alfa Romeo Mito? To achieve this, first we will discover why you need to adjust your high beams, and secondly how to adjust the headlights of your Alfa Romeo Mito.
Why adjust the headlights of your Alfa Romeo Mito?
So let’s start our article with the interest of adjusting the headlights of your Alfa Romeo Mito. For many people, our headlights are adjusted good enough, and they seem to light up enough at night. However this is not always the circumstance and looking at this setting, either because the headlights on your Alfa Romeo Mito are not bright enough, or because you have the impression that they are too weak is a great idea .
Adjusting the high beams of your Alfa Romeo Mito for safety
To begin with, the headlight adjustment of a Alfa Romeo Mito must be conducted for a simple safety explanation. If it’s for you, or for the other users you come across during your night trips. Indeed, if you don’t see enough, the risk is to ignore an obstacle on the road, or to anticipate a curve badly. However, if your headlights are too powerful, even if you are supposed to switch to low beam lights when you pass a car, the time required to make this switch will most of the time expose the driver in front of you to the headlight beam of your Alfa Romeo Mito . It is therefore important for others as well as for you to have an ideal adjustment of your headlights.
Adjusting the headlights of a Alfa Romeo Mito for legal reasons
Furthermore to safety, there is a law that regulates the power, the adjustment of motor vehicle headlights (articles R313-2 of the Highway Code), here is what it specifies: have between 2 and 4 headlights that illuminate at least 100 meters. Another legislation regulates their use, the European one (directive 76/756/EEC), which stipulates that there is no maximum height for the adjustment of the headlights, but that the maximum width of the beam must be very same to that of the dipped headlights and that the maximum luminosity must be 225, 000 cd.
How to adjust the headlights of a Alfa Romeo Mito?
We will now proceed to the section that interests you the most in this article, how to adjust the headlights of his Alfa Romeo Mito? This adjustment may appear a bit difficult, but by simply following the guidelines you should be able to do it without too much trouble.
Preparations to adjust the headlights of a Alfa Romeo Mito
To begin with, you’ll need to prepare your vehicle to adjust your high beams in good conditions, here are the preparations to set up:
- Place your vehicle on a surface in front of a white wall for example, about 4 or 5 meters from the wall.
- Verify your tire pressure attentively.
- Verify that the height adjustment knob for the lights is set to 0
- Try doing that with half a full tank.
- Remove all unnecessary weight from the car, just one person should be in the driver’s seat.
.
The headlight adjustment of his Alfa Romeo Mito
Once your car is in position, you will turn on your dipped beam and make a cross-shaped mark (one horizontal and one vertical section) in the middle of the beam that will be projected on the wall. Verify with a level that both parts of the cross are straight. Then back your vehicle up to a distance of between 7 and 10 metres. For the rest of the procedure here are the steps to follow:
- Open your hood, locate the screws for horizontal and vertical adjustment of the headlights of your Alfa Romeo Mito (they are in most cases marked, and those on top must modify the verticality and the one on the side manages the horizontality of the adjustment).
- Use a cloth or different things to hide the projector on which you are not making the correction.
- Using the screws to make the horizontal correction, you should have the most intense component of the beam which should be a little to the right of the vertical line noted on the wall
- With regard to vertical correction, you will have to use the screw to try to position the upper end of the beam at the level of the horizontal marking on the wall, or slightly below.
- Once finished, check that the headlights setting of your Alfa Romeo Mito is logical, do not think twice to check it after you have driven it, occasionally it may move.
.
.
If you want to adjust the fog lights on your Alfa Romeo Mito, please read our article on this subject matter.
To find more tips on the Alfa Romeo Mito, take a look at the Alfa Romeo Mito category.
