If you experience you can’t see as well at night, or you experience you’re lighting too low, or too high, in all these cases, there’s only one part of your car guilty – your headlights, as well named high beams. Nevertheless this adjustment may seem easy thanks to the thumbwheel on your dashboard, a complete adjustment is much more technical than this simple manipulation, and in this article, we are going to discover how to adjust the headlights of your Acura RDX? To achieve this, first we will discover why you need to adjust your high beams, and secondly how to adjust the headlights of your Acura RDX.

adjust-headlights-acura-rdx

Why adjust the headlights of your Acura RDX?

So let’s begin our content page with the interest of adjusting the headlights of your Acura RDX. For many people, our headlights are adjusted sufficiently, and they appear to light up enough at nighttime. However this is not always the circumstance and checking this setting, either because the headlights on your Acura RDX are not bright enough, or because you have the sensation that they are too weak is a wise decision .

Adjusting the high beams of your Acura RDX for safety

To begin with, the headlight adjustment of a Acura RDX must be carried out for a simple security explanation. Regardless it’s for you, or for the other users you come across during your night trips. In truth, if you don’t see enough, the risk is to miss out an obstacle driving, or to predict a curve badly. Alternatively, if your headlights are too strong, even if you are supposed to switch to low beam lights when you pass a vehicle, the time required to make this change will most of the time expose the driver in front of you to the headlight beam of your Acura RDX . It is consequently essential for others as well as for you to have an optimal adjustment of your headlights.

Adjusting the headlights of a Acura RDX for legal reasons

In addition to security, there is a law that regulates the power, the adjustment of motor vehicle headlights (articles R313-2 of the Highway Code), here is what it suggests: have between 2 and 4 headlights that illuminate at minimum 100 meters. Another legislation regulates their use, the European one (directive 76/756/EEC), which stipulates that there is no maximum height for the adjustment of the headlights, but that the maximum width of the beam must be equivalent to that of the dipped headlights and that the maximum luminosity must be 225, 000 cd.

How to adjust the headlights of a Acura RDX?

We will now move on to the part that interests you the most in this article, how to adjust the headlights of his Acura RDX? This setting may seem a bit difficult, but by simply following the guidance you should be able to perform it without too much problem.

Preparations to adjust the headlights of a Acura RDX

To begin with, you’ll need to prepare your car to adjust your high beams in good conditions, here are the preparations to put in place:

  • Place your car on a surface in front of a white wall for example, about 4 or 5 meters from the wall.
  • Verify your tire pressure attentively.
  • Verify that the height adjustment knob for the lights is set to 0
  • .

  • Try doing that with half a full tank.
  • Remove all unnecessary weight from the car, only one person should be in the driver’s seat.

The headlight adjustment of his Acura RDX

Once your car is in place, you will turn on your dipped beam and make a cross-shaped mark (one horizontal and one vertical section) in the middle of the beam that will be projected on the wall. Verify with a level that both parts of the cross are horizontal. Then back your car up to a distance of between 7 and 10 metres. For the rest of the process here are the steps to follow:

  • Open your hood, identify the screws for horizontal and vertical control of the headlights of your Acura RDX (they are in general marked, and those on top must adjust the verticality and the one on the side adjusts the horizontality of the adjustment).
  • Use a cloth or something else to hide the projector on which you are not making the adjustment.
  • Using the screws to make the horizontal adjustment, you should have the most intense part of the beam which should be a little to the right of the vertical line marked on the wall
  • .

  • With regard to vertical adjustment, you will have to use the screw to try to position the upper end of the beam at the level of the horizontal marking on the wall, or slightly down below.
  • Once finished, verify that the headlights setting of your Acura RDX is coherent, do not hesitate to verify it after you have driven it, in some cases it may move.

.
If you want to adjust the fog lights on your Acura RDX, please read our content page on this subject.

If perhaps you have any further questions about the Acura RDX, do not hesitate to consult our Acura RDX category.