Your car’s handbrake is actually a obligatory safety feature based on the highway code, in fact , it aims to end your Ram ProMaster, even on the slight slope. It must be in addition to the main brake controls. It is possible that with time the wire system of the hand brake will loosen up and you will not pass the technical control or you may well feel that it is no longer blocking your car. To address these complications, we will look at how to adjust the hand brake on your Ram ProMaster . To do this, first we will see the adjustment of the manual handbrake on Ram ProMaster , in that case, in a second step, how to adjust an automatic handbrake, and ultimately the price of the service performed by a professional.
Adjusting a manual handbrake on Ram ProMaster?
Therefore we start off our content with the hand brake adjustment of a Ram ProMaster in its manual version. This version works in a basic way with a system of wire and screws that allow you to control the tension of the device and so to modify the stroke of the lever of the handbrake. To act on it you will have to act on these types of screws to be able to expand the handbrake cable of the Ram ProMaster . In any case, ahead of adjusting the hand brake, you must check that your rear end wheels are certainly not blocked throughout the adjustment. Please find under the detailed method to carry out this intervention:
- At the level of your handbrake, remove the plastic console that protects it using the torx screws and clips.
- Once completed, you should see a trapdoor on your handbrake, open it to see the screw and wire system.
- You need to locate the locknuts and loosen them with a wrench tool to allow you to replace the cable tension.
- Now screw on the locking mechanism nuts on both sides, be sure to make the same changes on both sides to keep a balanced brake, and check that the hand brake lever of your Ram ProMaster has a stroke of about 3 notches.
- Tighten up the locknuts and test out the fastening of the rims of your car, if it’s very good you can reassemble the set, otherwise tighten up again the tightening screws until you get a great ideal configuration
.
If you don’t have access to the handbrake flap of the Ram ProMaster, the adjustment will probably be precisely the same however it will be done by passing beneath your car in the level of your handbrake lever. Make sure to put your car on the stand ahead of any actions.
How do I adjust the automatic handbrake of my Ram ProMaster?
Second system of handbrake adjustment on Ram ProMaster , this is an automatic handbrake, in contrast to the manual one, this is done on the brake drums or perhaps calipers, and is also imagined to adjust automatically to the wear of the brake shoes or pads. It may be that if you quickly have to acquire brake pads, your handbrake will lose power, allow me to share the steps to take to verify if the strain of your handbrake is the appropriate one:
- Be aware that an automatic handbrake cannot be adjusted directly because it is supposed to adapt themselves to the put on of the pads or pads of your Ram ProMaster.
- You can still verify that the system is working properly by putting the vehicle on the stand and verifying by driving under the auto that the brake pads are still in good functioning order.
- For drum brakes it can be necessary to take apart the tires to verify your the shoes, all of us advise you to have it conducted by a specialist.
- Be sure you change your pads if you need to.
What is the cost of adjusting the handbrake of Ram ProMaster by a specialist?
Finally, if you do not feel comfortable with this procedure, specifically since it worries a security component of your car, namely the adjustment of the handbrake of the Ram ProMaster , we give you advice to go to a auto technician who can adjust your handbrake for any about fifty euros . If you have problems with vibrations when braking on Ram ProMaster, do not think twice to consult our content which works with this trouble.
If you need more guides on the Ram ProMaster, go to our Ram ProMaster category.
