Your car’s handbrake is actually a required safety feature based on the highway code, in fact , it aims to quit your Peugeot 807, even over a slight incline. It must be in addition to the main brake system controls. It is also possible that after some time the wire system of the hand brake will loosen up and you will not pass the technical control or you might feel that it truly is no longer stopping your car. To address these challenges, we will look at how to adjust the hand brake on your Peugeot 807 . To do this, first we will see the adjustment of your manual handbrake on Peugeot 807 , in that case, in a second step, how to adjust an automatic handbrake, and then finally the price of the service performed by a professional.
Adjusting a manual handbrake on Peugeot 807?
Therefore we start off our document with the hand brake adjustment of a Peugeot 807 in its manual version. This kind of version works in a simple way having a system of wire and screws that allow you to manage the tension on the device and so to modify the stroke on the lever of the handbrake. To act on it you will have to act on these types of screws to be able to expand the handbrake cable of the Peugeot 807 . In any case, before adjusting the hand brake, you must check that your rear end wheels are not blocked throughout the adjustment. Make sure you find below the detailed method to carry out this intervention:
- At the level of your handbrake, remove the plastic console that covers it using the torx screws and clips.
- Once carried out, you should discover a trapdoor in your handbrake, open it to see the screw and wire system.
- You need to locate the locknuts and loosen them with a wrench to allow you to change the cable tension.
- Now screw on the lock nuts upon both sides, make sure to make the comparable changes upon both sides to keep a balanced brake, and check that the hand brake handle of your Peugeot 807 has a stroke of about 3 notches.
- Tighten up the locknuts and test the locking of the tires of your car, if it’s very good you can reassemble the set, otherwise tighten up again the tightening screws until you get an ideal setting
.
If you don’t have access to the handbrake flap of the Peugeot 807, the adjustment will probably be exactly the same however it will be done by passing under your car at the level of your handbrake handle. Make sure put your car on the stand before any action.
How do I adjust the automatic handbrake of my own Peugeot 807?
Second system of handbrake adjustment upon Peugeot 807 , this is an automatic handbrake, unlike the manual one, this is done directly on the brake drums or calipers, and it is supposed to adjust automatically for the wear of the brake shoes or brake pads. It may be that if you soon have to get brake pads, your handbrake will lose power, here are the steps to consider to check if the strain of your handbrake is the appropriate one:
- Take note that an automatic handbrake can not be modified directly because it is meant to adapt alone to the use of the brake pads or shoes of your Peugeot 807.
- You can still check that the system is working properly by simply putting the car on the stand and examining by driving under the car that the disc brake pads are still in good working order.
- For drum brakes it is necessary to take apart the tires to check the state of the shoes, we all encourage you to have it conducted by a specialist.
- Make sure to replace your brake pads if you need to.
What is the cost of adjusting the handbrake of Peugeot 807 by a specialist?
Finally, if you do not feel comfortable with this procedure, specifically since it issues a safety element of your car, namely the adjustment on the handbrake of the Peugeot 807 , we counsel you to go to a auto technician who are able to adjust your handbrake for any about fifty euros . For those who have problems with vibrations when braking on Peugeot 807, do not hesitate to refer to our document which relates to this trouble.
To discover more tips on the Peugeot 807, take a look at the Peugeot 807 category.
