Your car’s handbrake is a required safety feature based on the highway code, in fact , it aims to quit your Peugeot 407, even over a slight slope. It must be independent of the main brake controls. It is also possible that as time passes the wire system of the hand brake will loosen up and you will certainly not pass the technical control or you might feel that it really is no longer blocking your car. To deal with these problems, we will look at how to adjust the hand brake on your Peugeot 407 . To do this, first we will see the adjustment of a manual handbrake on Peugeot 407 , in that case, in a second step, how to adjust an automatic handbrake, and then the price of the service performed by a professional.
Adjusting a manual handbrake on Peugeot 407?
Therefore we start off our document with the hand brake adjustment of a Peugeot 407 in its manual version. This kind of version performs in a simple way with a system of wire and screws that allow you to manage the tension of the device and thus to modify the stroke of the lever of the handbrake. To act on it you will need to act on these kinds of screws to be able to stretch out the handbrake cable of the Peugeot 407 . In any case, just before adjusting the hand brake, you must check that your rear end wheels are certainly not blocked during the adjustment. Make sure you find under the detailed method to carry out this intervention:
- With the level of your handbrake, remove the plastic console that covers it using the torx screws and clips.
- Once completed, you should find out a trapdoor in your handbrake, open it to see the screw and wire system.
- You will have to locate the locknuts and loosen them with a wrench to allow you to change the cable stress.
- Now screw on the lock nuts on both sides, be sure to make the same changes upon both sides to keep a balanced braking, and check that the hand brake lever of your Peugeot 407 has a stroke of about three notches.
- Tighten up the locknuts and test out the fastening of the wheels of your car, if it’s good you can reassemble the set, otherwise tighten again the tightening screws until you get a great optimal configuration
.
If you don’t have access to the handbrake flap of the Peugeot 407, the adjustment will probably be exactly the same however it will be done by passing below your car in the level of your handbrake lever. Make sure put your car on the stand just before any actions.
How do I adjust the automatic handbrake of my own Peugeot 407?
Second system of handbrake adjustment on Peugeot 407 , this is an automatic handbrake, in contrast to the manual one, this method is done upon the brake drums or perhaps calipers, and it is expected to adapt automatically for the wear of the brake shoes or pads. It may be that if you quickly have to purchase brake pads, your handbrake will suffer power, allow me to share the steps for taking to examine if the tension of your handbrake is the appropriate one:
- Be aware that an automatic handbrake cannot be modified directly because it is designed to adapt themselves to the wear of the pads or shoes of your Peugeot 407.
- You can still examine that the system is functioning properly by putting your vehicle on the stand and verifying by driving under the motor vehicle that the disc brake pads are still in good working order.
- For drum brakes it will probably be required to take apart the brake systems to examine the state of the shoes, we suggest you to have it done by a specialist.
- Remember to change your pads if you need to.
What is the cost of adjusting the handbrake of Peugeot 407 by a specialist?
Finally, if you do not feel comfortable with this procedure, specifically since it questions a safety component of your car, namely the adjustment of the handbrake of the Peugeot 407 , we inform you to go to a repair shop who can adjust your handbrake for a about fifty local currency . If you have problems with vibrations when braking on Peugeot 407, do not think twice to refer to our document which deals with this issue.
If you want more guides on the Peugeot 407, go to our Peugeot 407 category.
