Your car’s handbrake is actually a mandatory safety feature based on the highway code, in fact , this aims to end your Peugeot 4008, even over a slight slope. It must be independent of the main brake controls. It is possible that after some time the wire system of the hand brake will relax and you will not really pass the technical control or you could feel that it truly is no longer stopping your car. To deal with these challenges, we will look at how to adjust the hand brake on your Peugeot 4008 . To get this done, first we will see the adjustment of a manual handbrake on Peugeot 4008 , then simply, in a second step, how to adjust an automatic handbrake, and then the price of the service performed by a professional.

adjust-handbrake-peugeot-4008

Adjusting a manual handbrake on Peugeot 4008?

Therefore we commence our document with the hand brake adjustment of a Peugeot 4008 in its manual version. This version works in a simple way which has a system of wire and anchoring screws that allow you to manage the tension with the device and therefore to modify the stroke with the lever of your handbrake. To act on it you should act on these kinds of screws in order to extend the handbrake cable of your Peugeot 4008 . In any case, just before adjusting the hand brake, you must be sure your rear wheels aren’t blocked during the adjustment. Make sure you find below the detailed technique to carry out this intervention:

  • At the level of the handbrake, remove the plastic console that covers it using the torx screws and clips.
  • Once carried out, you should find out a trapdoor on your handbrake, open it to see the screw and wire system.
  • You will need to locate the locknuts and loosen them with a wrench to allow you to replace the cable pressure.
  • Now screw on the lock nuts on both sides, make sure to make the same changes upon both sides to hold a balanced braking, and be sure the hand brake handle of your Peugeot 4008 has a stroke of about 3 notches.
  • Tighten the locknuts and test out the fastening of the tires of your car, if it’s good you can reassemble the set, otherwise tighten again the tightening anchoring screws until you get a great ideal setting

.
If you don’t have access to the handbrake flap of your Peugeot 4008, the adjustment will be precisely the same but it will be done by passing directly below your car in the level of the handbrake handle. Make sure you set your car on the stand just before any action.

How do I adjust the automatic handbrake of my own Peugeot 4008?

Second approach to handbrake adjustment on Peugeot 4008 , this is an automatic handbrake, in contrast to the manual one, that one is done on the brake drums or perhaps calipers, and is also supposed to adjust automatically to the wear of your brake shoes or disc brake pads. It may be that if you soon have to purchase brake pads, the handbrake will suffer power, here are the steps to take to check if the strain of your handbrake is the right one:

  • Be aware that an automatic handbrake cannot be modified straight because it is supposed to adapt themselves to the don of the disc brake pads or pads of your Peugeot 4008.
  • You can still check that the system is working correctly by simply putting your vehicle on the stand and checking by driving under the vehicle that the disc brake pads are still in good functioning order.
  • For drum brakes it will probably be required to disassemble the tires to check the state of the shoes, all of us advise you to have it carried out by a specialist.
  • Remember to change your disc brake pads if you need to.

What is the cost of adjusting the handbrake of Peugeot 4008 by a specialist?

Finally, if you do not feel comfortable with this procedure, especially since it issues a security component of your car, namely the adjustment with the handbrake of your Peugeot 4008 , we give you advice to go to a technician that can adjust the handbrake for a about fifty local currency . When you have problems with vibrations when braking on Peugeot 4008, do not wait to refer to our document which refers to this problem.

If you want more tutorials on the Peugeot 4008, go to our Peugeot 4008 category.